Hi Tom, Stefano, Any chance to get this still into 2017.11? It allows to use 2017.11 on my board...
-- Stefan On 2017-10-17 13:59, Stefan Agner wrote: > From: Stefan Agner <stefan.ag...@toradex.com> > > On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB. > Currently 32KiB is reserved for the IMX header. However, this is > not reflected in the size limit. In v2017.11-rc2 the actual size > limit (512KiB-32KiB) has been reached for Colibri VF61, which > lead to a successful build of U-Boot but not a working binary. > > The IMX header is much smaller than 32KiB, typically around 1KiB. > Decrease the reserved size to 4KiB and specify the correct U-Boot > size limit. Apply this new base address and limit for all Vybrid > based boards. > > Signed-off-by: Stefan Agner <stefan.ag...@toradex.com> > --- > > include/configs/colibri_vf.h | 4 ++-- > include/configs/pcm052.h | 4 ++-- > include/configs/vf610twr.h | 4 ++-- > 3 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h > index 8166aa4afb..bf3bbffe24 100644 > --- a/include/configs/colibri_vf.h > +++ b/include/configs/colibri_vf.h > @@ -75,8 +75,8 @@ > #define CONFIG_FDTADDR 0x84000000 > > /* We boot from the gfxRAM area of the OCRAM. */ > -#define CONFIG_SYS_TEXT_BASE 0x3f408000 > -#define CONFIG_BOARD_SIZE_LIMIT 524288 > +#define CONFIG_SYS_TEXT_BASE 0x3f401000 > +#define CONFIG_BOARD_SIZE_LIMIT 520192 > > #define SD_BOOTCMD \ > "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ > diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h > index 8144a83db2..060928bd30 100644 > --- a/include/configs/pcm052.h > +++ b/include/configs/pcm052.h > @@ -89,8 +89,8 @@ > #define CONFIG_LOADADDR 0x82000000 > > /* We boot from the gfxRAM area of the OCRAM. */ > -#define CONFIG_SYS_TEXT_BASE 0x3f408000 > -#define CONFIG_BOARD_SIZE_LIMIT 524288 > +#define CONFIG_SYS_TEXT_BASE 0x3f401000 > +#define CONFIG_BOARD_SIZE_LIMIT 520192 > > /* if no target-specific extra environment settings were defined by the > target, define an empty one */ > diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h > index 3430f27c40..ddfcd6f618 100644 > --- a/include/configs/vf610twr.h > +++ b/include/configs/vf610twr.h > @@ -79,8 +79,8 @@ > #define CONFIG_SYS_LOAD_ADDR 0x82000000 > > /* We boot from the gfxRAM area of the OCRAM. */ > -#define CONFIG_SYS_TEXT_BASE 0x3f408000 > -#define CONFIG_BOARD_SIZE_LIMIT 524288 > +#define CONFIG_SYS_TEXT_BASE 0x3f401000 > +#define CONFIG_BOARD_SIZE_LIMIT 520192 > > /* > * We do have 128MB of memory on the Vybrid Tower board. Leave the last _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot