Hi Duncan, On 16 September 2017 at 14:14, Duncan Hare <d...@synoia.com> wrote: > I'm attempting to add a "wget" command. It mostly there by I cannot find out > how to set the > > #define CONFIG_CMD_WGET 1 into u-boot cfg by handand got a terse message to > use a Kconfig file. > Which Konfig file should I used for defining the absence/presence of this new > command?
It seems like you figured this out. For others who read this, you need to add a 'config CMD_WGET' to cmd/Kconfig. The u-boot.cfg file is generated by the build system. It is an output, not an input. > > For development and testing I have not used the #ifdef method of including of > excluding code, > as I find it hard enough to write one set of code, two sets simultaneously, > TCP and Kconfig-uration, exceeds my abilities. > > I have most of the TCP stack needed coded into in net.c, the sliding windows > code being written now, with packet in and packet out the intersection > of the new code and existing code. > I can transferr small files. > > UDP function is not affected, and still works. > Thanks > Duncan Hare > > 714 931 7952 > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
