From: Ian Ray <ian....@ge.com>
Add support for bootcounter on an EXT filesystem.
Sync configuration whitelist.
Signed-off-by: Ian Ray <ian....@ge.com>
Signed-off-by: Martyn Welch <martyn.we...@collabora.co.uk>
---
Changes for v2:
- Adding Kconfig for EXT bootcount.
Changes for v3:
- Add over-arching BOOTCOUNT Kconfig entry.
Changes for v5:
- Improved BOOTCOUNT_EXT description.
- Fixed checkpatch issues.
README | 7 +++++
drivers/Kconfig | 2 ++
drivers/bootcount/Kconfig | 58 ++++++++++++++++++++++++++++++++++++
drivers/bootcount/Makefile | 1 +
drivers/bootcount/bootcount_ext.c | 62 +++++++++++++++++++++++++++++++++++++++
5 files changed, 130 insertions(+)
create mode 100644 drivers/bootcount/Kconfig
create mode 100644 drivers/bootcount/bootcount_ext.c
diff --git a/README b/README
index f288176..6336c5c 100644
--- a/README
+++ b/README
@@ -2362,6 +2362,13 @@ The following options need to be configured:
CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for
the bootcounter.
CONFIG_BOOTCOUNT_ALEN = address len
+ CONFIG_BOOTCOUNT_EXT
+ enable support for the bootcounter in EXT filesystem
+ CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read
+ and write.
+ CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface
+ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part
+ CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename
- Show boot progress:
CONFIG_SHOW_BOOT_PROGRESS
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 613e602..c2e813f 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -10,6 +10,8 @@ source "drivers/ata/Kconfig"
source "drivers/block/Kconfig"
+source "drivers/bootcount/Kconfig"
+
source "drivers/clk/Kconfig"
source "drivers/cpu/Kconfig"
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
new file mode 100644
index 0000000..c9d627c
--- /dev/null
+++ b/drivers/bootcount/Kconfig
@@ -0,0 +1,58 @@
+#
+# Boot count configuration
+#
+
+menu "Boot count support"
+
+config BOOTCOUNT
+ bool "Enable Boot count support"
+ help
+ Enable boot count support, which provides the ability to store the
+ number of times the board has booted on a number of different
+ persistent storage mediums.
+
+if BOOTCOUNT
+
+config BOOTCOUNT_EXT
+ bool "Boot counter on EXT filesystem"
+ help
+ Add support for maintaining boot count in a file on an EXT
+ filesystem.
+
+if BOOTCOUNT_EXT
+
+config SYS_BOOTCOUNT_EXT_INTERFACE
+ string "Interface on which to find boot counter EXT filesystem"
+ default "mmc"
+ depends on BOOTCOUNT_EXT
+ help
+ Set the interface to use when locating the filesystem to use for the
+ boot counter.
+
+config SYS_BOOTCOUNT_EXT_DEVPART
+ string "Partition of the boot counter EXT filesystem"
+ default "0:1"
+ depends on BOOTCOUNT_EXT
+ help
+ Set the partition to use when locating the filesystem to use for the
+ boot counter.
+
+config SYS_BOOTCOUNT_EXT_NAME
+ string "Path and filename of the EXT filesystem based boot counter"
+ default "/boot/failures"
+ depends on BOOTCOUNT_EXT
+ help
+ Set the filename and path of the file used to store the boot counter.
+
+config SYS_BOOTCOUNT_ADDR
+ hex "RAM address used for reading and writing the boot counter"
+ default 0x7000A000
+ depends on BOOTCOUNT_EXT
+ help
+ Set the address used for reading and writing the boot counter.
+
+endif
+
+endif
+
+endmenu
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index ed9659a..45445d2 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o
obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o
obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o
obj-$(CONFIG_BOOTCOUNT_I2C) += bootcount_i2c.o
+obj-$(CONFIG_BOOTCOUNT_EXT) += bootcount_ext.o
diff --git a/drivers/bootcount/bootcount_ext.c
b/drivers/bootcount/bootcount_ext.c
new file mode 100644
index 0000000..e0dd21b
--- /dev/null
+++ b/drivers/bootcount/bootcount_ext.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2017 General Electric Company. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <bootcount.h>
+#include <fs.h>
+#include <mapmem.h>
+
+#define BC_MAGIC 0xbc
+
+void bootcount_store(ulong a)
+{
+ u8 *buf;
+ loff_t len;
+ int ret;
+
+ if (fs_set_blk_dev(CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE,
+ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART, FS_TYPE_EXT)) {
+ puts("Error selecting device\n");
+ return;
+ }
+
+ buf = map_sysmem(CONFIG_SYS_BOOTCOUNT_ADDR, 2);
+ buf[0] = BC_MAGIC;
+ buf[1] = (a & 0xff);
+ unmap_sysmem(buf);
+
+ ret = fs_write(CONFIG_SYS_BOOTCOUNT_EXT_NAME,
+ CONFIG_SYS_BOOTCOUNT_ADDR, 0, 2, &len);
+ if (ret != 0)
+ puts("Error storing bootcount\n");
+}
+
+ulong bootcount_load(void)
+{
+ u8 *buf;
+ loff_t len_read;
+ int ret;
+
+ if (fs_set_blk_dev(CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE,
+ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART, FS_TYPE_EXT)) {
+ puts("Error selecting device\n");
+ return 0;
+ }
+
+ ret = fs_read(CONFIG_SYS_BOOTCOUNT_EXT_NAME, CONFIG_SYS_BOOTCOUNT_ADDR,
+ 0, 2, &len_read);
+ if (ret != 0 || len_read != 2) {
+ puts("Error loading bootcount\n");
+ return 0;
+ }
+
+ buf = map_sysmem(CONFIG_SYS_BOOTCOUNT_ADDR, 2);
+ if (buf[0] == BC_MAGIC)
+ ret = buf[1];
+
+ unmap_sysmem(buf);
+
+ return ret;
+}
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
