+ York
-----Original Message-----
From: Yangbo Lu [mailto:yangbo...@nxp.com]
Sent: 2017年11月16日 10:28
To: u-boot@lists.denx.de; Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>;
Sumit Garg <sumit.g...@nxp.com>
Cc: Y.b. Lu <yangbo...@nxp.com>
Subject: [PATCH] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for RDB
For LS1012ARDB RevD and later versions, the I2C reading for DIP switch setting
had been no longer reliable since the board was reworked. This patch is to add
hwconfig support to enable/disable
eSDHC1 manually.
Signed-off-by: Yangbo Lu <yangbo...@nxp.com>
---
board/freescale/ls1012ardb/ls1012ardb.c | 29 ++++-------------------------
1 file changed, 4 insertions(+), 25 deletions(-)
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c
b/board/freescale/ls1012ardb/ls1012ardb.c
index 41283dba42..19f0c3f941 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -128,39 +128,18 @@ int board_init(void)
int esdhc_status_fixup(void *blob, const char *compat) {
- char esdhc0_path[] = "/soc/esdhc@1560000";
char esdhc1_path[] = "/soc/esdhc@1580000";
- u8 io = 0;
- u8 mux_sdhc2;
+ char *env_hwconfig;
- do_fixup_by_path(blob, esdhc0_path, "status", "okay",
- sizeof("okay"), 1);
+ env_hwconfig = getenv("hwconfig");
- i2c_set_bus_num(0);
-
- /*
- * The I2C IO-expander for mux select is used to control the muxing
- * of various onboard interfaces.
- *
- * IO1[3:2] indicates SDHC2 interface demultiplexer select lines.
- * 00 - SDIO wifi
- * 01 - GPIO (to Arduino)
- * 10 - eMMC Memory
- * 11 - SPI
- */
- if (i2c_read(I2C_MUX_IO1_ADDR, 0, 1, &io, 1) < 0) {
- printf("Error reading i2c boot information!\n");
- return 0; /* Don't want to hang() on this error */
- }
-
- mux_sdhc2 = (io & 0x0c) >> 2;
- /* Enable SDHC2 only when use SDIO wifi and eMMC */
- if (mux_sdhc2 == 2 || mux_sdhc2 == 0)
+ if (hwconfig_f("esdhc1", env_hwconfig))
do_fixup_by_path(blob, esdhc1_path, "status", "okay",
sizeof("okay"), 1);
else
do_fixup_by_path(blob, esdhc1_path, "status", "disabled",
sizeof("disabled"), 1);
+
return 0;
}
--
2.14.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
