Hello Jose,
Am 27.11.2017 um 11:45 schrieb Jose Miguel Sanchez Sanabria:
Hi everyone.
I was testing the booting process from NAND using an UBI/UBIFS image in an
igepv2 board.
However MLO tries to boot first kernel (falcon mode activated) and then
falls back to u-boot (as expected anyway I just wanted to load u-boot from
ubi) trying to load volume 0, but fails.
U-Boot SPL 2017.11-dirty (Nov 24 2017 - 14:29:26)
Trying to boot from NAND
UBI warning: LEB 0 of 1 is missing
UBI warning: Failed to load volume 3
UBI warning: LEB 0 of 1 is missing
UBI warning: Failed to load volume 3
UBI warning: Failed
Loading Linux failed, falling back to U-Boot.
UBI warning: LEB 0 of 1 is missing
UBI warning: Failed to load volume 0
UBI warning: LEB 0 of 1 is missing
UBI warning: Failed to load volume 0
UBI warning: Failed
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
I can however mount the ubi image but suspicious log appear:
u-boot:> ubifsmount ubi0:ubirootfs
UBIFS assert failed in ubifs_change_lp at 540
UBIFS assert failed in ubifs_release_lprops at 278
UBIFS assert failed in ubifs_change_lp at 540
UBIFS assert failed in ubifs_release_lprops at 278
This has to do with the discussion about ubifs null deference so I suppose
it should not affect much to write operation.
I would finally like to know if the ubi/ubifs support is functional; which
would mean I did not use the ubi tools correctly to create the ubi image.
I must admit, I have currently no working testsetup. I try to
reactivate my automated tbot tests [1] at the end of the week.
bye,
Heiko
[1] http://xeidos.ddns.net/buildbot/builders/ari_ubi
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: [email protected]
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
