From: Christopher Spinrath <christopher.spinr...@rwth-aachen.de> Commit 5248930ebf48 ("dm: imx: cm_fx6: Enable more driver model support") enabled driver model support for AHCI. Remove the old, now unused, sata init code from the board file.
Signed-off-by: Christopher Spinrath <christopher.spinr...@rwth-aachen.de> --- board/compulab/cm_fx6/cm_fx6.c | 42 ------------------------------------------ 1 file changed, 42 deletions(-) diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 638e9f393b..81438cd28c 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -210,48 +210,6 @@ static int cm_fx6_setup_issd(void) #define CM_FX6_SATA_INIT_RETRIES 10 -# if !CONFIG_IS_ENABLED(AHCI) -int sata_initialize(void) -{ - int err, i; - - /* Make sure this gpio has logical 0 value */ - gpio_direction_output(CM_FX6_SATA_PWLOSS_INT, 0); - udelay(100); - cm_fx6_sata_power(1); - - for (i = 0; i < CM_FX6_SATA_INIT_RETRIES; i++) { - err = setup_sata(); - if (err) { - printf("SATA setup failed: %d\n", err); - return err; - } - - udelay(100); - - err = __sata_initialize(); - if (!err) - break; - - /* There is no device on the SATA port */ - if (sata_port_status(0, 0) == 0) - break; - - /* There's a device, but link not established. Retry */ - } - - return err; -} - -int sata_stop(void) -{ - __sata_stop(); - cm_fx6_sata_power(0); - mdelay(250); - - return 0; -} -# endif #else static int cm_fx6_setup_issd(void) { return 0; } #endif -- 2.15.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot