> -----Original Message----- > From: Calvin Johnson [mailto:calvin.john...@nxp.com] > Sent: Monday, October 09, 2017 2:42 PM > To: u-boot@lists.denx.de > Cc: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>; York Sun > <york....@nxp.com>; joe.hershber...@ni.com; Calvin Johnson > <calvin.john...@nxp.com>; Anji Jagarlmudi <anji.jagarlm...@nxp.com> > Subject: [PATCH 9/9] configs: ls1012a: add pfe configuration for LS1012A > > Signed-off-by: Calvin Johnson <calvin.john...@nxp.com> > Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlm...@nxp.com> > --- > configs/ls1012afrdm_qspi_defconfig | 1 + > configs/ls1012aqds_qspi_defconfig | 1 + > configs/ls1012ardb_qspi_defconfig | 1 + > drivers/net/Kconfig | 1 + > drivers/net/Makefile | 1 + > drivers/net/pfe_eth/Kconfig | 23 ++++++++++++++++++++++- > include/configs/ls1012a_common.h | 6 +++--- > include/configs/ls1012afrdm.h | 7 +++++++ > include/configs/ls1012aqds.h | 14 ++++++++++++++ > include/configs/ls1012ardb.h | 8 ++++++++ > 10 files changed, 59 insertions(+), 4 deletions(-) > > diff --git a/configs/ls1012afrdm_qspi_defconfig > b/configs/ls1012afrdm_qspi_defconfig > index 84b5577..7db7a18 100644 > --- a/configs/ls1012afrdm_qspi_defconfig > +++ b/configs/ls1012afrdm_qspi_defconfig > @@ -32,6 +32,7 @@ CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_PFE=y > CONFIG_PCI=y > CONFIG_DM_PCI=y > CONFIG_DM_PCI_COMPAT=y > diff --git a/configs/ls1012aqds_qspi_defconfig > b/configs/ls1012aqds_qspi_defconfig > index 2124273..4b9fdf5 100644 > --- a/configs/ls1012aqds_qspi_defconfig > +++ b/configs/ls1012aqds_qspi_defconfig > @@ -37,6 +37,7 @@ CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_PFE=y > CONFIG_PCI=y > CONFIG_DM_PCI=y > CONFIG_DM_PCI_COMPAT=y > diff --git a/configs/ls1012ardb_qspi_defconfig > b/configs/ls1012ardb_qspi_defconfig > index 40349ce..d63e736 100644 > --- a/configs/ls1012ardb_qspi_defconfig > +++ b/configs/ls1012ardb_qspi_defconfig > @@ -35,6 +35,7 @@ CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_PFE=y > CONFIG_PCI=y > CONFIG_DM_PCI=y > CONFIG_DM_PCI_COMPAT=y > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 736aab2..c82c63b 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -304,4 +304,5 @@ config FEC2_PHY_NORXERR > The PHY does not have a RXERR line (RMII only). > (so program the FEC to ignore it). > > +source "drivers/net/pfe_eth/Kconfig" > endif # NETDEVICES > diff --git a/drivers/net/Makefile b/drivers/net/Makefile > index 94a4fd8..0572cde 100644 > --- a/drivers/net/Makefile > +++ b/drivers/net/Makefile > @@ -75,3 +75,4 @@ obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o > obj-$(CONFIG_VSC9953) += vsc9953.o > obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o > obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o > +obj-$(CONFIG_FSL_PFE) += pfe_eth/ > diff --git a/drivers/net/pfe_eth/Kconfig b/drivers/net/pfe_eth/Kconfig > index b9996df..c05aeda 100644 > --- a/drivers/net/pfe_eth/Kconfig > +++ b/drivers/net/pfe_eth/Kconfig > @@ -1,8 +1,29 @@ > +menuconfig FSL_PFE > + bool "Freescale PFE driver" > + help > + This driver provides support for Freescale PFE. > + > +if FSL_PFE > + > config UTIL_PE_DISABLED > bool > help > Disable UTIL processor engine of PFE > > -config SYS_FSL_PPFE_ADDR > +config SYS_FSL_PFE_ADDR > hex "PFE base address" > default 0x04000000 > + > +config SYS_LS_PFE_FW_ADDR > + hex "Flash address of PFE firmware" > + default 0x40a00000 > +
Why this parameter in Kconfig. This address is hard-coded per platform as defined in standard LSDK flash layout. --pk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot