From: Tomi Valkeinen <tomi.valkei...@ti.com>
gpio1_2 is used for HPD interrupt with DRA76's DVI add-on board, so mux
the pin as gpio and PIN_INPUT.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
---
board/ti/dra7xx/mux_data.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 3c3a19a0e1..b5dcaa584a 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -882,7 +882,7 @@ const struct pad_conf_entry dra76x_core_padconf_array[] = {
{I2C2_SCL, (M1 | PIN_INPUT_PULLUP)}, /* i2c2_scl.hdmi1_ddc_sda */
{WAKEUP0, (M14 | PIN_OUTPUT)}, /* N/A.gpio1_0 */
{WAKEUP1, (M14 | PIN_OUTPUT)}, /* N/A.gpio1_1 */
- {WAKEUP2, (M1 | PIN_OUTPUT)}, /* N/A.sys_nirq2 */
+ {WAKEUP2, (M14 | PIN_INPUT)}, /* N/A.gpio1_2 */
{WAKEUP3, (M1 | PIN_OUTPUT)}, /* N/A.sys_nirq1 */
};
--
2.15.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
