On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote: > This series adds OF_CONTROL support for TMDSEVM{3530,3730} and > additionally updates ethaddr setup with smc911x initialization. > > Devicetree files are taken from Linux v4.15-rc3. Note that this is the > first addition of OMAP34XX devicetree files. > > Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb] > > --- 8< ----------------------------------------------------------------- > U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10) > Trying to boot from MMC1 > reading u-boot.img > reading u-boot.img > > > U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600) > > OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz > Model: TI OMAP35XX EVM (TMDSEVM3530) > OMAP3 EVM board + LPDDR/NAND > I2C: ready > DRAM: 256 MiB > NAND: 256 MiB > MMC: OMAP SD/MMC: 0 > Read back SMSC id 0x92200000 > OMAP die ID: 265a002400000000040365fa1801b01f > Net: smc911x-0 > starting USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... 1 USB Device(s) found > Hit any key to stop autoboot: 0 > OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr > serial@4806a000 > serial@4806a000 > serial@4806a000 > --- 8< ----------------------------------------------------------------- > > > Derald D. Woods (3): > ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730} > ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730} > ARM: omap3: evm: Refactor 'board_eth_init' > > arch/arm/dts/Makefile | 4 + > arch/arm/dts/omap-gpmc-smsc911x.dtsi | 55 ++++++ > arch/arm/dts/omap3-evm-37xx-u-boot.dtsi | 29 ++++ > arch/arm/dts/omap3-evm-37xx.dts | 110 ++++++++++++ > arch/arm/dts/omap3-evm-common.dtsi | 195 +++++++++++++++++++++ > arch/arm/dts/omap3-evm-processor-common.dtsi | 216 > ++++++++++++++++++++++++ > arch/arm/dts/omap3-evm-u-boot.dtsi | 29 ++++ > arch/arm/dts/omap3-evm.dts | 89 ++++++++++ > arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 73 ++++++++ > arch/arm/dts/omap34xx.dtsi | 84 +++++++++ > arch/arm/mach-omap2/omap3/Kconfig | 4 + > board/ti/evm/evm.c | 24 +-- > configs/omap3_evm_defconfig | 9 +- > include/configs/omap3_evm.h | 2 - > 14 files changed, 896 insertions(+), 27 deletions(-) > create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi > create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi > create mode 100644 arch/arm/dts/omap3-evm-37xx.dts > create mode 100644 arch/arm/dts/omap3-evm-common.dtsi > create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi > create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi > create mode 100644 arch/arm/dts/omap3-evm.dts > create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi > create mode 100644 arch/arm/dts/omap34xx.dtsi > > -- > 2.15.1 >
Ping. If there is any concern, please let me know and I will make corrections. I plan to also update beagleboard and overo to use their respective devicetree files. I would like to have these three OMAP34XX boards, that I possess, to be near the same level of support. It will help me to continue testing OMAP34XX stuff in general. Derald _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot