There is no need to call is_enabled() twice in authenticate_image - it does nothing but add an additional layer of indentation.
We can check for is_enabled() at the start of the function and return the result code directly. Signed-off-by: Bryan O'Donoghue <bryan.odonog...@linaro.org> Cc: Stefano Babic <sba...@denx.de> Cc: Fabio Estevam <fabio.este...@nxp.com> Cc: Peng Fan <peng....@nxp.com> Cc: Albert Aribaud <albert.u.b...@aribaud.net> Cc: Sven Ebenfeld <sven.ebenf...@gmail.com> Cc: George McCollister <george.mccollis...@gmail.com> --- arch/arm/mach-imx/hab.c | 138 ++++++++++++++++++++++++------------------------ 1 file changed, 69 insertions(+), 69 deletions(-) diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c index 9fe6d43..6f86c02 100644 --- a/arch/arm/mach-imx/hab.c +++ b/arch/arm/mach-imx/hab.c @@ -428,91 +428,91 @@ int authenticate_image(uint32_t ddr_start, uint32_t image_size) hab_rvt_entry = hab_rvt_entry_p; hab_rvt_exit = hab_rvt_exit_p; - if (is_hab_enabled()) { - printf("\nAuthenticate image from DDR location 0x%x...\n", - ddr_start); + if (!is_hab_enabled()) { + puts("hab fuse not enabled\n"); + return result; + } - hab_caam_clock_enable(1); + printf("\nAuthenticate image from DDR location 0x%x...\n", + ddr_start); - if (hab_rvt_entry() == HAB_SUCCESS) { - /* If not already aligned, Align to ALIGN_SIZE */ - ivt_offset = (image_size + ALIGN_SIZE - 1) & - ~(ALIGN_SIZE - 1); + hab_caam_clock_enable(1); - start = ddr_start; - bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE; + if (hab_rvt_entry() == HAB_SUCCESS) { + /* If not already aligned, Align to ALIGN_SIZE */ + ivt_offset = (image_size + ALIGN_SIZE - 1) & + ~(ALIGN_SIZE - 1); + + start = ddr_start; + bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE; #ifdef DEBUG - printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", - ivt_offset, ddr_start + ivt_offset); - puts("Dumping IVT\n"); - print_buffer(ddr_start + ivt_offset, - (void *)(ddr_start + ivt_offset), - 4, 0x8, 0); - - puts("Dumping CSF Header\n"); - print_buffer(ddr_start + ivt_offset+IVT_SIZE, - (void *)(ddr_start + ivt_offset+IVT_SIZE), - 4, 0x10, 0); + printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", + ivt_offset, ddr_start + ivt_offset); + puts("Dumping IVT\n"); + print_buffer(ddr_start + ivt_offset, + (void *)(ddr_start + ivt_offset), + 4, 0x8, 0); + + puts("Dumping CSF Header\n"); + print_buffer(ddr_start + ivt_offset + IVT_SIZE, + (void *)(ddr_start + ivt_offset + IVT_SIZE), + 4, 0x10, 0); #if !defined(CONFIG_SPL_BUILD) - get_hab_status(); + get_hab_status(); #endif - puts("\nCalling authenticate_image in ROM\n"); - printf("\tivt_offset = 0x%x\n", ivt_offset); - printf("\tstart = 0x%08lx\n", start); - printf("\tbytes = 0x%x\n", bytes); + puts("\nCalling authenticate_image in ROM\n"); + printf("\tivt_offset = 0x%x\n", ivt_offset); + printf("\tstart = 0x%08lx\n", start); + printf("\tbytes = 0x%x\n", bytes); #endif - /* - * If the MMU is enabled, we have to notify the ROM - * code, or it won't flush the caches when needed. - * This is done, by setting the "pu_irom_mmu_enabled" - * word to 1. You can find its address by looking in - * the ROM map. This is critical for - * authenticate_image(). If MMU is enabled, without - * setting this bit, authentication will fail and may - * crash. - */ - /* Check MMU enabled */ - if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) { - if (is_mx6dq()) { - /* - * This won't work on Rev 1.0.0 of - * i.MX6Q/D, since their ROM doesn't - * do cache flushes. don't think any - * exist, so we ignore them. - */ - if (!is_mx6dqp()) - writel(1, MX6DQ_PU_IROM_MMU_EN_VAR); - } else if (is_mx6sdl()) { - writel(1, MX6DLS_PU_IROM_MMU_EN_VAR); - } else if (is_mx6sl()) { - writel(1, MX6SL_PU_IROM_MMU_EN_VAR); - } + /* + * If the MMU is enabled, we have to notify the ROM + * code, or it won't flush the caches when needed. + * This is done, by setting the "pu_irom_mmu_enabled" + * word to 1. You can find its address by looking in + * the ROM map. This is critical for + * authenticate_image(). If MMU is enabled, without + * setting this bit, authentication will fail and may + * crash. + */ + /* Check MMU enabled */ + if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) { + if (is_mx6dq()) { + /* + * This won't work on Rev 1.0.0 of + * i.MX6Q/D, since their ROM doesn't + * do cache flushes. don't think any + * exist, so we ignore them. + */ + if (!is_mx6dqp()) + writel(1, MX6DQ_PU_IROM_MMU_EN_VAR); + } else if (is_mx6sdl()) { + writel(1, MX6DLS_PU_IROM_MMU_EN_VAR); + } else if (is_mx6sl()) { + writel(1, MX6SL_PU_IROM_MMU_EN_VAR); } + } - load_addr = (uint32_t)hab_rvt_authenticate_image( - HAB_CID_UBOOT, - ivt_offset, (void **)&start, - (size_t *)&bytes, NULL); - if (hab_rvt_exit() != HAB_SUCCESS) { - puts("hab exit function fail\n"); - load_addr = 0; - } - } else { - puts("hab entry function fail\n"); + load_addr = (uint32_t)hab_rvt_authenticate_image( + HAB_CID_UBOOT, + ivt_offset, (void **)&start, + (size_t *)&bytes, NULL); + if (hab_rvt_exit() != HAB_SUCCESS) { + puts("hab exit function fail\n"); + load_addr = 0; } + } else { + puts("hab entry function fail\n"); + } - hab_caam_clock_enable(0); + hab_caam_clock_enable(0); #if !defined(CONFIG_SPL_BUILD) - get_hab_status(); + get_hab_status(); #endif - } else { - puts("hab fuse not enabled\n"); - } - - if ((!is_hab_enabled()) || (load_addr != 0)) + if (load_addr != 0) result = 0; return result; -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot