Dear Kim Phillips, In message <20100107191507.54632118.kim.phill...@freescale.com> you wrote: > > Please pull support for 8315rdb nand boot, the esd VME-CADDY/2, and > some other fixes: > > The following changes since commit 6ca9da4d42aeb43df5ef29f7d0518009df583b2f: > Wolfgang Denk (1): > Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc83xx.git master > > Anton Vorontsov (1): > mpc83xx: Add NAND boot support for MPC8315E-RDB boards > > Heiko Schocher (1): > mpc83xx: add support configure bus parking > > Reinhard Arlt (2): > mpc83xx: Add support for MPC8349 esd caddy2 > mpc83xx: vme8349: Fix power up reset sequence for tsi148 > > Stefan Roese (1): > mpc83xx: spd_sdram.c: Disable memory controller before initializing > > MAINTAINERS | 1 + > MAKEALL | 2 + > Makefile | 9 +- > board/esd/vme8349/pci.c | 33 ++++-- > board/esd/vme8349/vme8349.c | 195 > ++++++++++++++++++++--------- > board/esd/vme8349/vme8349pin.h | 36 ++++++ > board/freescale/mpc8315erdb/config.mk | 8 ++ > board/freescale/mpc8315erdb/mpc8315erdb.c | 42 ++++++ > board/freescale/mpc8315erdb/sdram.c | 9 ++- > cpu/mpc83xx/cpu_init.c | 12 ++ > cpu/mpc83xx/spd_sdram.c | 9 ++ > doc/README.mpc8315erdb | 29 ++++- > include/configs/MPC8315ERDB.h | 95 +++++++++++--- > include/configs/kmeter1.h | 8 ++ > include/configs/vme8349.h | 98 ++++++++------ > 15 files changed, 455 insertions(+), 131 deletions(-) > create mode 100644 board/esd/vme8349/vme8349pin.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "Stupidity, like virtue, is its own reward" - William E. Davidsen _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot