Before use GPIO, we need to request gpio first. Signed-off-by: Peng Fan <peng....@nxp.com> Cc: Stefano Babic <sba...@denx.de> Cc: Fabio Estevam <fabio.este...@nxp.com> --- drivers/pci/pcie_imx.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index 2900c8d9d1..37a554abf2 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -517,6 +517,7 @@ static int imx6_pcie_init_phy(void) __weak int imx6_pcie_toggle_power(void) { #ifdef CONFIG_PCIE_IMX_POWER_GPIO + gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_reset"); gpio_direction_output(CONFIG_PCIE_IMX_POWER_GPIO, 0); mdelay(20); gpio_set_value(CONFIG_PCIE_IMX_POWER_GPIO, 1); @@ -556,6 +557,7 @@ __weak int imx6_pcie_toggle_reset(void) * state due to being previously used in U-Boot. */ #ifdef CONFIG_PCIE_IMX_PERST_GPIO + gpio_request(CONFIG_PCIE_IMX_PERST_GPIO, "pcie_reset"); gpio_direction_output(CONFIG_PCIE_IMX_PERST_GPIO, 0); mdelay(20); gpio_set_value(CONFIG_PCIE_IMX_PERST_GPIO, 1); -- 2.14.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot