On Wed, Dec 27, 2017 at 1:55 PM, Florian Fainelli <f.faine...@gmail.com> wrote: > > > On 12/09/2017 03:02 PM, Joe Hershberger wrote: >> On Sat, Dec 9, 2017 at 4:59 PM, Florian Fainelli <f.faine...@gmail.com> >> wrote: >>> Hi all, >>> >>> This patch series adds support for the Broadcom BCM53xx switches, in >>> particular >>> BCM53125 which is found no the Lamobo R1 board. >>> >>> The driver is largely based on the DSA/b53 driver Linux driver and only >>> incorporates what is necessary to succesfully bring-up all ports (including >>> the >>> management port) for boot over the network: >>> >>> => dhcp >>> dw_adjust_link: Speed: 1000, full duplex >>> BOOTP broadcast 1 >>> DHCP client bound to address 192.168.0.11 (3 ms) >>> Using ethernet@01c50000 device >>> TFTP from server 192.168.0.1; our IP address is 192.168.0.11 >>> Filename 'sun7i-a20-lamobo-r1-kernel.bin'. >>> Load address: 0x42000000 >>> Loading: ################################################################# >>> ################################################################# >>> ################################ >>> 11.6 MiB/s >>> done >>> Bytes transferred = 2371552 (242fe0 hex) >>> => >>> >>> Joe there is one warning left which does not look legit to me since we now >>> have >>> a help paragraph describing the config symbol: >>> >>> WARNING: please write a paragraph that describes the config symbol fully >>> #34: FILE: drivers/net/phy/Kconfig:15: >>> +config B53_SWITCH >>> >>> and one CHECK left which I intentionally did not fix because it makes the >>> definitions of the bits less clear: >>> CHECK: Prefer using the BIT macro >>> #134: FILE: drivers/net/phy/b53.c:63: >>> +#define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S) >> >> Works for me.o > > Should I expect you to queue up these patches in a git tree/branch, or > is someone else picking up networking/PHY patches?
Sorry for the delay - I was out for a few weeks and couldn't get things in before I left due to people's bad patches breaking build. Pull request sent today includes this. Cheers, -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot