For example to store the environment in a file named "/uboot.env" in MMC
"0", where partition "1" contains the EXT4 filesystem, the following
configs should be added to the board's default config:
CONFIG_ENV_IS_IN_EXT4=y
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1"
CONFIG_ENV_EXT4_FILE="/uboot.env"
CONFIG_ENV_EXT4_INTERFACE="mmc"
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-or...@linaro.org>
---
env/Kconfig | 39 +++++++++++++++++++++++++++++++++++++++
env/env.c | 2 ++
env/ext4.c | 20 ++++++++++----------
3 files changed, 51 insertions(+), 10 deletions(-)
diff --git a/env/Kconfig b/env/Kconfig
index bef6e89..692f863 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -81,6 +81,13 @@ config ENV_IS_IN_FAT
- CONFIG_FAT_WRITE:
This must be enabled. Otherwise it cannot save the environment file.
+config ENV_IS_IN_EXT4
+ bool "Environment is in a EXT4 filesystem"
+ depends on !CHAIN_OF_TRUST
+ select EXT4_WRITE
+ help
+ Define this if you want to use the EXT4 file system for the
environment.
+
config ENV_IS_IN_FLASH
bool "Environment in flash memory"
depends on !CHAIN_OF_TRUST
@@ -396,6 +403,38 @@ config ENV_FAT_FILE
It's a string of the FAT file name. This file use to store the
environment.
+config ENV_EXT4_INTERFACE
+ string "Name of the block device for the environment"
+ depends on ENV_IS_IN_EXT4
+ help
+ Define this to a string that is the name of the block device.
+
+config ENV_EXT4_DEVICE_AND_PART
+ string "Device and partition for where to store the environemt in EXT4"
+ depends on ENV_IS_IN_EXT4
+ help
+ Define this to a string to specify the partition of the device. It can
+ be as following:
+
+ "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
+ - "D:P": device D partition P. Error occurs if device D has no
+ partition table.
+ - "D:0": device D.
+ - "D" or "D:": device D partition 1 if device D has partition
+ table, or the whole device D if has no partition
+ table.
+ - "D:auto": first partition in device D with bootable flag set.
+ If none, first valid partition in device D. If no
+ partition table then means device D.
+
+config ENV_EXT4_FILE
+ string "Name of the EXT4 file to use for the environemnt"
+ depends on ENV_IS_IN_EXT4
+ default "uboot.env"
+ help
+ It's a string of the EXT4 file name. This file use to store the
+ environment (explicit path to the file)
+
if ARCH_SUNXI
config ENV_OFFSET
diff --git a/env/env.c b/env/env.c
index 76a5608..7455632 100644
--- a/env/env.c
+++ b/env/env.c
@@ -32,6 +32,8 @@ static enum env_location env_get_default_location(void)
return ENVL_EEPROM;
else if IS_ENABLED(CONFIG_ENV_IS_IN_FAT)
return ENVL_FAT;
+ else if IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)
+ return ENVL_EXT4;
else if IS_ENABLED(CONFIG_ENV_IS_IN_FLASH)
return ENVL_FLASH;
else if IS_ENABLED(CONFIG_ENV_IS_IN_MMC)
diff --git a/env/ext4.c b/env/ext4.c
index 6520221..07fd061 100644
--- a/env/ext4.c
+++ b/env/ext4.c
@@ -46,8 +46,8 @@ static int env_ext4_save(void)
if (err)
return err;
- part = blk_get_device_part_str(EXT4_ENV_INTERFACE,
- EXT4_ENV_DEVICE_AND_PART,
+ part = blk_get_device_part_str(CONFIG_ENV_EXT4_INTERFACE,
+ CONFIG_ENV_EXT4_DEVICE_AND_PART,
&dev_desc, &info, 1);
if (part < 0)
return 1;
@@ -57,16 +57,16 @@ static int env_ext4_save(void)
if (!ext4fs_mount(info.size)) {
printf("\n** Unable to use %s %s for saveenv **\n",
- EXT4_ENV_INTERFACE, EXT4_ENV_DEVICE_AND_PART);
+ CONFIG_ENV_EXT4_INTERFACE,
CONFIG_ENV_EXT4_DEVICE_AND_PART);
return 1;
}
- err = ext4fs_write(EXT4_ENV_FILE, (void *)&env_new, sizeof(env_t));
+ err = ext4fs_write(CONFIG_ENV_EXT4_FILE, (void *)&env_new,
sizeof(env_t));
ext4fs_close();
if (err == -1) {
printf("\n** Unable to write \"%s\" from %s%d:%d **\n",
- EXT4_ENV_FILE, EXT4_ENV_INTERFACE, dev, part);
+ CONFIG_ENV_EXT4_FILE, CONFIG_ENV_EXT4_INTERFACE, dev,
part);
return 1;
}
@@ -84,8 +84,8 @@ static int env_ext4_load(void)
int err;
loff_t off;
- part = blk_get_device_part_str(EXT4_ENV_INTERFACE,
- EXT4_ENV_DEVICE_AND_PART,
+ part = blk_get_device_part_str(CONFIG_ENV_EXT4_INTERFACE,
+ CONFIG_ENV_EXT4_DEVICE_AND_PART,
&dev_desc, &info, 1);
if (part < 0)
goto err_env_relocate;
@@ -95,16 +95,16 @@ static int env_ext4_load(void)
if (!ext4fs_mount(info.size)) {
printf("\n** Unable to use %s %s for loading the env **\n",
- EXT4_ENV_INTERFACE, EXT4_ENV_DEVICE_AND_PART);
+ CONFIG_ENV_EXT4_INTERFACE,
CONFIG_ENV_EXT4_DEVICE_AND_PART);
goto err_env_relocate;
}
- err = ext4_read_file(EXT4_ENV_FILE, buf, 0, CONFIG_ENV_SIZE, &off);
+ err = ext4_read_file(CONFIG_ENV_EXT4_FILE, buf, 0, CONFIG_ENV_SIZE,
&off);
ext4fs_close();
if (err == -1) {
printf("\n** Unable to read \"%s\" from %s%d:%d **\n",
- EXT4_ENV_FILE, EXT4_ENV_INTERFACE, dev, part);
+ CONFIG_ENV_EXT4_FILE, CONFIG_ENV_EXT4_INTERFACE, dev,
part);
goto err_env_relocate;
}
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
