On 11/29/2017 09:13 PM, Bhaskar Upadhaya wrote:
> LS1012A-2G5RDB belongs to LS1012A family with features
> 2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi
> DDR, eMMC, QuadSPI, UART
>
> Signed-off-by: Bhaskar Upadhaya <bhaskar.upadh...@nxp.com>
> ---
> changes for v3:
> 1. remove pfe driver changes from this patch
> 2. remove PCIe, DSPI from ls1012a2g5rdb_qspi_defconfig
>
<snip>
> diff --git a/board/freescale/ls1012ardb/ls1012ardb.c
> b/board/freescale/ls1012ardb/ls1012ardb.c
> index 41283db..9675335 100644
> --- a/board/freescale/ls1012ardb/ls1012ardb.c
> +++ b/board/freescale/ls1012ardb/ls1012ardb.c
> @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR;
>
> int checkboard(void)
> {
> +#ifdef CONFIG_TARGET_LS1012ARDB
> u8 in1;
>
> puts("Board: LS1012ARDB ");
> @@ -57,6 +58,9 @@ int checkboard(void)
> puts(": bank2\n");
> else
> puts("unknown\n");
> +#else
> + puts("Board: LS1012A2G5RDB ");
> +#endif
>
> return 0;
> }
> @@ -148,10 +152,12 @@ int esdhc_status_fixup(void *blob, const char *compat)
> * 10 - eMMC Memory
> * 11 - SPI
> */
> +#ifdef CONFIG_TARGET_LS1012ARDB
> if (i2c_read(I2C_MUX_IO1_ADDR, 0, 1, &io, 1) < 0) {
> printf("Error reading i2c boot information!\n");
> return 0; /* Don't want to hang() on this error */
> }
> +#endif
>
> mux_sdhc2 = (io & 0x0c) >> 2;
> /* Enable SDHC2 only when use SDIO wifi and eMMC */
Bhaskar,
Please double check changes to this file. I am seeing compiling errors
related to I2C_MUX_IO_ADDR, I2C_MUX_IO_1, SW_REV_MASK, SW_REV_D for
ls1012a2g5rdb_qspi on top of master branch.
York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
