Currently our serial device search chokes on the fact that the serial
probe function could fail. If it does, instead of searching for the next
usable serial device, it just quits.

This patch changes the fallback logic so that even when a serial device
was not probed correctly, we just try the next ones until we find one that
works.

Signed-off-by: Alexander Graf <ag...@suse.de>
---
 drivers/serial/serial-uclass.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 2e5116f7ce..637544d1a7 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -74,6 +74,7 @@ static void serial_find_console_or_panic(void)
 {
        const void *blob = gd->fdt_blob;
        struct udevice *dev;
+       int ret;
 
        if (CONFIG_IS_ENABLED(OF_PLATDATA)) {
                uclass_first_device(UCLASS_SERIAL, &dev);
@@ -104,8 +105,8 @@ static void serial_find_console_or_panic(void)
                 * from 1!).
                 *
                 * Failing that, get the device with sequence number 0, or in
-                * extremis just the first serial device we can find. But we
-                * insist on having a console (even if it is silent).
+                * extremis just the first working serial device we can find.
+                * But we insist on having a console (even if it is silent).
                 */
 #ifdef CONFIG_CONS_INDEX
 #define INDEX (CONFIG_CONS_INDEX - 1)
@@ -113,8 +114,22 @@ static void serial_find_console_or_panic(void)
 #define INDEX 0
 #endif
                if (!uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) ||
-                   !uclass_get_device(UCLASS_SERIAL, INDEX, &dev) ||
-                   (!uclass_first_device(UCLASS_SERIAL, &dev) && dev)) {
+                   !uclass_get_device(UCLASS_SERIAL, INDEX, &dev)) {
+                       if (dev->flags & DM_FLAG_ACTIVATED) {
+                               gd->cur_serial_dev = dev;
+                               return;
+                       }
+               }
+
+               /* Search for any working device */
+               for (ret = uclass_first_device_check(UCLASS_SERIAL, &dev);
+                    dev;
+                    ret = uclass_next_device_check(&dev)) {
+                       if (ret) {
+                               /* Device did succeed probing */
+                               continue;
+                       }
+
                        gd->cur_serial_dev = dev;
                        return;
                }
-- 
2.12.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to