On Sat, Jan 20, 2018 at 6:41 AM, Álvaro Fernández Rojas <nolt...@gmail.com> wrote: > BCM63xx SPI controller is a bit tricky since it doesn't allow keeping CS > active between transfers, so I had to modify the spi_flash driver in order > to allow limiting reads. > > v9: Introduce changes suggested by Simon Glass: > - Fix defconfig order. > v8: Introduce changes suggested by Jagan Teki & Daniel Schwierzeck: > - Squash wait_bit commits. > - Remove register param castings. > v7: Introduce changes suggested by Jagan Teki & Daniel Schwierzeck: > - Use const void* reg for compatibility with 64 bit systems. > - Remove prefix and use __func__ instead. > - Remove wait_for_bit and update callers to wait_for_bit_le32. > v6: Introduce changes suggested by Jagan Teki: > - Use cmd instead of val to avoid confusions. > - Switch to wait_for_bit instead of infinite loop. > v5: Introduce changes suggested by Jagan Teki: > - Use long structs for registers > v4: Introduce changes suggested by Jagan Teki: > - Add data for each HW controller instead of having two separate configs. > v3: Fix bug introduced in v2: sizeof(cmd) vs len. > Also rename BCM6338 SPI driver to BCM6348 SPI since BCM6338 is a stripped > down version of the BCM6348. > Switch to devfdt_get_addr_size_index(). > v2: Introduce changes requested by Simon Glass: > - Always include command bytes when determining max write size. > Also move SPI aliases from .dts to .dtsi files. > > Álvaro Fernández Rojas (12): > wait_bit: add 8/16/32 BE/LE versions of wait_for_bit > wait_bit: use wait_for_bit_le32 and remove wait_for_bit > drivers: spi: allow limiting reads > drivers: spi: consider command bytes when sending transfers > dm: spi: add BCM63xx SPI driver > mips: bmips: add bcm63xx-spi driver support for BCM6338 > mips: bmips: add bcm63xx-spi driver support for BCM6348 > mips: bmips: add bcm63xx-spi driver support for BCM6358 > mips: bmips: add bcm63xx-spi driver support for BCM3380 > mips: bmips: add bcm63xx-spi driver support for BCM63268 > mips: bmips: enable the SPI flash on the Sagem F@ST1704 > mips: bmips: enable the SPI flash on the Netgear CG3100D
Applied to u-boot-spi/master, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot