Allwinner V3/H3/H5/A64 have PHY0 dual_route, where routing happens
through EHCI/OHCI or through MUSB based id_det. id_det can be 0 and
1 for Host and Peripheral dr_modes and it can be gpio value for OTG.

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
Cc: Marek Vasut <ma...@denx.de>
---
 arch/arm/include/asm/arch-sunxi/usb_phy.h |  1 +
 arch/arm/mach-sunxi/usb_phy.c             | 20 ++++++++++++++++++++
 drivers/usb/musb-new/sunxi.c              |  7 +++++++
 3 files changed, 28 insertions(+)

diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h 
b/arch/arm/include/asm/arch-sunxi/usb_phy.h
index 5a9cacb..e546e03 100644
--- a/arch/arm/include/asm/arch-sunxi/usb_phy.h
+++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h
@@ -19,3 +19,4 @@ void sunxi_usb_phy_power_off(int index);
 int sunxi_usb_phy_vbus_detect(int index);
 int sunxi_usb_phy_id_detect(int index);
 void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
+void sunxi_usb_phy0_reroute(int id_det);
diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c
index a81425d..93340c7 100644
--- a/arch/arm/mach-sunxi/usb_phy.c
+++ b/arch/arm/mach-sunxi/usb_phy.c
@@ -28,6 +28,8 @@
 #else
 #define SUNXI_USB_CSR                  0x410
 #endif
+#define REG_PHY_OTGCTL                 0x420
+#define OTGCTL_ROUTE_MUSB              BIT(0)
 
 #define SUNXI_USB_PMU_IRQ_ENABLE       0x800
 #define SUNXI_USB_PASSBY_EN            1
@@ -332,6 +334,24 @@ int sunxi_usb_phy_id_detect(int index)
        return gpio_get_value(phy->gpio_id_det);
 }
 
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I) || \
+           defined(CONFIG_MACH_SUN8I_V3S)
+void sunxi_usb_phy0_reroute(int id_det)
+{
+       u32 regval;
+
+       regval = readl(SUNXI_USB0_BASE + REG_PHY_OTGCTL);
+       if (id_det == 0) {
+               /* Host mode. Route phy0 to EHCI/OHCI */
+               regval &= ~OTGCTL_ROUTE_MUSB;
+       } else {
+               /* Peripheral mode. Route phy0 to MUSB */
+               regval |= OTGCTL_ROUTE_MUSB;
+       }
+       writel(regval, SUNXI_USB0_BASE + REG_PHY_OTGCTL);
+}
+#endif
+
 int sunxi_usb_phy_probe(void)
 {
        struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index d02e083..c64c551 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -272,6 +272,13 @@ static int sunxi_musb_init(struct musb *musb)
 #endif
 
        sunxi_usb_phy_init(0);
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I) || \
+           defined(CONFIG_MACH_SUN8I_V3S)
+       if (is_host_enabled(musb))
+               sunxi_usb_phy0_reroute(0);
+       else
+               sunxi_usb_phy0_reroute(1);
+#endif
 
        USBC_ConfigFIFO_Base();
        USBC_EnableDpDmPullUp(musb->mregs);
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to