From: Tien Fong Chee <tien.fong.c...@intel.com> This is file system generic loader which can be used to load the file image from the storage into target such as memory. The consumer driver would then use this loader to program whatever, ie. the FPGA device.
Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com> Reviewed-by: Lothar Waßmann <l...@karo-electronics.de> --- common/Kconfig | 9 ++ common/Makefile | 1 + common/fs_loader.c | 320 +++++++++++++++++++++++++++++++++++++++++++++ doc/README.firmware_loader | 76 +++++++++++ include/fs_loader.h | 28 ++++ 5 files changed, 434 insertions(+) create mode 100644 common/fs_loader.c create mode 100644 doc/README.firmware_loader create mode 100644 include/fs_loader.h diff --git a/common/Kconfig b/common/Kconfig index 21e067c..cbb0976 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -547,6 +547,15 @@ config DISPLAY_BOARDINFO when U-Boot starts up. The board function checkboard() is called to do this. +config GENERIC_FIRMWARE_LOADER + bool "Enable generic firmware loader driver for file system" + help + This is file system generic loader which can be used to load + the file image from the storage into target such as memory. + + The consumer driver would then use this loader to program whatever, + ie. the FPGA device. + menu "Start-up hooks" config ARCH_EARLY_INIT_R diff --git a/common/Makefile b/common/Makefile index c7bde23..92d8fb3 100644 --- a/common/Makefile +++ b/common/Makefile @@ -134,3 +134,4 @@ obj-$(CONFIG_$(SPL_)LOG) += log.o obj-$(CONFIG_$(SPL_)LOG_CONSOLE) += log_console.o obj-y += s_record.o obj-y += xyzModem.o +obj-$(CONFIG_GENERIC_FIRMWARE_LOADER) += fs_loader.o diff --git a/common/fs_loader.c b/common/fs_loader.c new file mode 100644 index 0000000..c30393e --- /dev/null +++ b/common/fs_loader.c @@ -0,0 +1,320 @@ +/* + * Copyright (C) 2018 Intel Corporation <www.intel.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <errno.h> +#include <fs.h> +#include <fs_loader.h> +#include <nand.h> +#include <sata.h> +#include <spi.h> +#include <spi_flash.h> +#ifdef CONFIG_SPL +#include <spl.h> +#endif +#include <linux/string.h> +#ifdef CONFIG_CMD_UBIFS +#include <ubi_uboot.h> +#include <ubifs_uboot.h> +#endif +#include <usb.h> + +struct firmware_priv { + const char *name; /* Filename */ + u32 offset; /* Offset of reading a file */ +}; + +static struct device_location default_locations[] = { + { + .name = "mmc", + .devpart = "0:1", + }, + { + .name = "usb", + .devpart = "0:1", + }, + { + .name = "sata", + .devpart = "0:1", + }, +}; + +/* USB build is not supported yet in SPL */ +#ifndef CONFIG_SPL_BUILD +#ifdef CONFIG_USB_STORAGE +static int init_usb(void) +{ + int err; + + err = usb_init(); + if (err) + return err; + +#ifndef CONFIG_DM_USB + err = usb_stor_scan(1); + if (err) + return err; +#endif + + return err; +} +#else +static int init_usb(void) +{ + debug("Error: Cannot load flash image: no USB support\n"); + return -ENOSYS; +} +#endif +#endif + +#ifdef CONFIG_SATA +static int init_storage_sata(void) +{ + return sata_probe(0); +} +#else +static int init_storage_sata(void) +{ + debug("Error: Cannot load image: no SATA support\n"); + return -ENOSYS; +} +#endif + +#ifdef CONFIG_CMD_UBIFS +static int mount_ubifs(struct device_location *location) +{ + int ret; + char cmd[32]; + + if (ret = ubi_part(location->mtdpart, NULL)) { + debug("Cannot find mtd partition %s\n", location->mtdpart); + return ret; + } + + return cmd_ubifs_mount(location->ubivol); +} + +static int umount_ubifs(void) +{ + return cmd_ubifs_umount(); +} +#else +static int mount_ubifs(struct device_location *location) +{ + debug("Error: Cannot load image: no UBIFS support\n"); + return -ENOSYS; +} +#endif + +#if defined(CONFIG_SPL_MMC_SUPPORT) && defined(CONFIG_SPL_BUILD) +__weak int init_mmc(void) +{ + /* Just for the case MMC is not yet initialized */ + struct mmc *mmc = NULL; + int err; + +#ifdef CONFIG_SPL + spl_mmc_find_device(&mmc, spl_boot_device()); +#else + debug("#define CONFIG_SPL is required or overrriding %s\n", + __func__); + return -ENOENT; +#endif + + err = mmc_init(mmc); + if (err) { + debug("spl: mmc init failed with error: %d\n", err); + return err; + } + + return err; +} +#else +__weak int init_mmc(void) +{ + /* Expect somewhere already initialize MMC */ + return 0; +} +#endif + +static int select_fs_dev(struct device_location *location) +{ + int ret; + + if (!strcmp("mmc", location->name)) { + ret = fs_set_blk_dev("mmc", location->devpart, FS_TYPE_ANY); + } else if (!strcmp("usb", location->name)) { + ret = fs_set_blk_dev("usb", location->devpart, FS_TYPE_ANY); + } else if (!strcmp("sata", location->name)) { + ret = fs_set_blk_dev("sata", location->devpart, FS_TYPE_ANY); + } else if (!strcmp("ubi", location->name)) { + if (location->ubivol) + ret = fs_set_blk_dev("ubi", NULL, FS_TYPE_UBIFS); + else + ret = -ENODEV; + } else { + debug("Error: unsupported location storage.\n"); + return -ENODEV; + } + + if (ret) + debug("Error: could not access storage.\n"); + + return ret; +} + +static int init_storage_device(struct device_location *location) +{ + int ret; + + if (!strcmp("mmc", location->name)) { + ret = init_mmc(); + } else if (!strcmp("sata", location->name)) { + ret = init_storage_sata(); + } else if (location->ubivol) { + ret = mount_ubifs(location); +#ifndef CONFIG_SPL_BUILD + /* USB build is not supported yet in SPL */ + } else if (!strcmp("usb", location->name)) { + ret = init_usb(); +#endif + } else { + debug("Error: no supported storage device is available.\n"); + ret = -ENODEV; + } + + return ret; +} + +static void set_storage_devpart(char *name, char *devpart) +{ + size_t i; + + for (i = 0; i < ARRAY_SIZE(default_locations); i++) { + if (!strcmp(default_locations[i].name, name)) + default_locations[i].devpart = devpart; + } +} + +/** + * _request_firmware_prepare - Prepare firmware struct. + * + * @firmware_p: Pointer to pointer to firmware image. + * @name: Name of firmware file. + * @dbuf: Address of buffer to load firmware into. + * @size: Size of buffer. + * @offset: Offset of a file for start reading into buffer. + * + * Return: Negative value if fail, 0 for successful. + */ +static int _request_firmware_prepare(struct firmware **firmware_p, + const char *name, void *dbuf, + size_t size, u32 offset) +{ + struct firmware *firmware; + struct firmware_priv *fw_priv; + + *firmware_p = NULL; + + if (!name || name[0] == '\0') + return -EINVAL; + + firmware = calloc(1, sizeof(*firmware)); + if (!firmware) + return -ENOMEM; + + fw_priv = calloc(1, sizeof(*fw_priv)); + if (!fw_priv) { + free(firmware); + return -ENOMEM; + } + + fw_priv->name = name; + fw_priv->offset = offset; + firmware->data = dbuf; + firmware->size = size; + firmware->priv = fw_priv; + *firmware_p = firmware; + + return 0; +} + +/** + * fw_get_filesystem_firmware - load firmware into an allocated buffer. + * @location: An array of supported firmware location. + * @firmware_p: pointer to firmware image. + * + * Return: Size of total read, negative value when error. + */ +static int fw_get_filesystem_firmware(struct device_location *location, + struct firmware *firmware_p) +{ + struct firmware_priv *fw_priv = NULL; + loff_t actread; + char *dev_part; + int ret; + + dev_part = env_get("fw_dev_part"); + if (dev_part) + set_storage_devpart(location->name, dev_part); + + ret = init_storage_device(location); + if (ret) + goto out; + + ret = select_fs_dev(location); + if (ret) + goto out; + + fw_priv = firmware_p->priv; + + ret = fs_read(fw_priv->name, (ulong)firmware_p->data, fw_priv->offset, + firmware_p->size, &actread); + if (ret) { + debug("Error: %d Failed to read %s from flash %lld != %d.\n", + ret, fw_priv->name, actread, firmware_p->size); + } else { + ret = actread; + } + +out: +#ifdef CONFIG_CMD_UBIFS + if (location->ubivol) + umount_ubifs(); +#endif + + return ret; +} + +/** + * request_firmware_into_buf - Load firmware into a previously allocated buffer. + * @firmware_p: Pointer to firmware image. + * @name: Name of firmware file. + * @location: An array of supported firmware location. + * @buf: Address of buffer to load firmware into. + * @size: Size of buffer. + * @offset: Offset of a file for start reading into buffer. + * + * The firmware is loaded directly into the buffer pointed to by @buf and + * the @firmware_p data member is pointed at @buf. + * + * Return: Size of total read, negative value when error. + */ +int request_firmware_into_buf(struct firmware **firmware_p, + const char *name, + struct device_location *location, + void *buf, size_t size, u32 offset) +{ + int ret; + + ret = _request_firmware_prepare(firmware_p, name, buf, size, offset); + if (ret < 0) /* error */ + return ret; + + ret = fw_get_filesystem_firmware(location, *firmware_p); + + return ret; +} diff --git a/doc/README.firmware_loader b/doc/README.firmware_loader new file mode 100644 index 0000000..f6e4c6b --- /dev/null +++ b/doc/README.firmware_loader @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2017 Intel Corporation <www.intel.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +Introduction +------------ +This is firmware loader for U-Boot framework, which has very close to some Linux +Firmware API. For the details of Linux Firmware API, you can refer to +https://01.org/linuxgraphics/gfx-docs/drm/driver-api/firmware/index.html. + +Firmware loader can be used to load whatever(firmware, image, and binary) from +the flash in file system format into target location such as memory, then +consumer driver such as FPGA driver can program FPGA image from the target +location into FPGA. + +Firmware Loader API core features +--------------------------------- +=> Firmware storage device partition search + ---------------------------------------- + => Default storage device partition search set for mmc, usb and sata + as shown in below: + static struct device_location default_locations[] = { + { + .name = "mmc", + .devpart = "0:1", + }, + { + .name = "usb", + .devpart = "0:1", + }, + { + .name = "sata", + .devpart = "0:1", + }, + }; + + However, the default storage device .devpart value can be overwritten + with value which is defined in the environment variable "FW_DEV_PART". + For example: env_set("fw_dev_part", "0:2"); + +Firmware Loader API +------------------- +=> int request_firmware_into_buf(struct firmware **firmware_p, + const char *name, + struct device_location *location, + void *buf, size_t size, u32 offset) + -------------------------------------------------------------- + => Load firmware into a previously allocated buffer + + Parameters: + struct firmware **firmware_p + pointer to firmware image + + const char *name + name of firmware file + + struct device_location *location + an array of supported firmware location + + void *buf + address of buffer to load firmware into + + size_t size + size of buffer + + u32 offset + offset of a file for start reading into buffer + + return: size of total read + -ve when error + + Description: + The firmware is loaded directly into the buffer pointed to by buf and + the @firmware_p data member is pointed at buf. diff --git a/include/fs_loader.h b/include/fs_loader.h new file mode 100644 index 0000000..60a6ba2 --- /dev/null +++ b/include/fs_loader.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2018 Intel Corporation <www.intel.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ +#ifndef _FS_LOADER_H_ +#define _FS_LOADER_H_ + +#include <linux/types.h> + +struct firmware { + size_t size; /* Size of a file */ + const u8 *data; /* Buffer for file */ + void *priv; /* Firmware loader private fields */ +}; + +struct device_location { + char *name; /* Such as mmc, usb,and sata. */ + char *devpart; /* Use the load command dev:part conventions */ + char *mtdpart; /* MTD partition for ubi part */ + char *ubivol; /* UBI volume-name for ubifsmount */ +}; + +int request_firmware_into_buf(struct firmware **firmware_p, + const char *name, + struct device_location *location, + void *buf, size_t size, u32 offset); +#endif -- 2.2.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot