Add simple and meaningful kconfig option for prcm.c
instead of using MACH type on Makefile.

PRCM (Power/Reset/Clock Management) is considered as a
Multi-Functional Device, so used the same on Kconfig definition.

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
 arch/arm/mach-sunxi/Kconfig  | 7 +++++++
 arch/arm/mach-sunxi/Makefile | 2 +-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 1fededd..2b9f48b 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,12 @@ config SPL_LDSCRIPT
 config IDENT_STRING
        default " Allwinner Technology"
 
+config MFD_SUN6I_PRCM
+       bool "Allwinner A31 PRCM controller"
+       help
+         Support for the PRCM (Power/Reset/Clock Management) unit available
+         in A31 SoC.
+
 config SUNXI_HIGH_SRAM
        bool
        default n
@@ -87,6 +93,7 @@ config MACH_SUN6I
        select CPU_V7_HAS_NONSEC
        select CPU_V7_HAS_VIRT
        select ARCH_SUPPORT_PSCI
+       select MFD_SUN6I_PRCM
        select SUNXI_GEN_SUN6I
        select SUPPORT_SPL
        select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 2a3c379..3c1c660 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -16,7 +16,7 @@ obj-y += pinmux.o
 ifndef CONFIG_MACH_SUN9I
 obj-y  += usb_phy.o
 endif
-obj-$(CONFIG_MACH_SUN6I)       += prcm.o
+obj-$(CONFIG_MFD_SUN6I_PRCM)   += prcm.o
 obj-$(CONFIG_MACH_SUN8I)       += prcm.o
 obj-$(CONFIG_MACH_SUN9I)       += prcm.o
 obj-$(CONFIG_MACH_SUN6I)       += p2wi.o
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to