On Mon, 2018-02-12 at 09:23 -0500, Tom Rini wrote: > On Mon, Feb 12, 2018 at 01:27:30PM +0000, Alexey Brodkin wrote: > > Hi Tom, Simon, > > > > On Sun, 2018-02-11 at 15:47 -0500, Tom Rini wrote: > > > On Tue, Jan 30, 2018 at 06:23:13PM +0300, Alexey Brodkin wrote: > > > > > > > CONFIG_SYS_TEXT_BASE must be set anyways and then it is used in many > > > > places in the same Makefile without any checks so there's no point in > > > > keeping this check araound just in one place. > > > > > > > > Signed-off-by: Alexey Brodkin <abrod...@synopsys.com> > > > > Cc: Tom Rini <tr...@konsulko.com> > > > > Acked-by: Masahiro Yamada <yamada.masah...@socionext.com> > > > > --- > > > > Makefile | 2 -- > > > > 1 file changed, 2 deletions(-) > > > > > > > > diff --git a/Makefile b/Makefile > > > > index ab3453dcebdc..6f15612b4d07 100644 > > > > --- a/Makefile > > > > +++ b/Makefile > > > > @@ -820,9 +820,7 @@ LDFLAGS_u-boot += $(LDFLAGS_FINAL) > > > > # Avoid 'Not enough room for program headers' error on binutils 2.28 > > > > onwards. > > > > LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker) > > > > > > > > -ifneq ($(CONFIG_SYS_TEXT_BASE),) > > > > LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) > > > > -endif > > > > > > This then causes xtensa to fail to build as it does not set > > > CONFIG_SYS_TEXT_BASE. > > > > And that also obviously breaks "efi-x86" target as well because > > CONFIG_SYS_TEXT_BASE > > seems to not be defined for EFI and then LD gets a string like "-Ttext -o > > u-boot" > > where CONFIG_SYS_TEXT_BASE is supposed to be used as some value.
[snip] > > So if "-Ttext CONFIG_SYS_TEXT_BASE" is not used for each and every board I > > may use > > CONFIG_SYS_TEXT_BASE directly in linker just as we have it now, see > > https://urldefense.proofpoint.com/v2/url?u=http-3A__git.denx.de_-3Fp-3Du-2Dboot.git-3Ba-3Dblob-3Bf-3Darch_arc_cpu_u-2Dboot.lds-23l14&d=DwIBAg&c=DP > > L6_X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=3oKsgMcKriZJ81auV4XDwr4ovIElxycDMpRlTqS7nhc&s=Yq0YW- > > MQvofxwQ961IRHzIS5xWYtHHzxMp_Fwn91h5s&e= > > and then there might be any section like .ivt, .text, .myfunkysection etc. > > > > In fact in the Linux kernel "-Ttext XXX" is not used for everybody - some > > arches like MIPS and PPC indeed set it but others do other things. > > > > The simplest thing might be is to add another #ifdef for ARC and X86 which > > both > > use CONFIG_SYS_TEXT_BASE directly in their linker scripts like that: > > ------------------->8----------------- > > --- a/Makefile > > +++ b/Makefile > > @@ -820,9 +820,11 @@ LDFLAGS_u-boot += $(LDFLAGS_FINAL) > > # Avoid 'Not enough room for program headers' error on binutils 2.28 > > onwards. > > LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker) > > > > +ifeq($(CONFIG_ARC)$(CONFIG_X86),) > > LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) > > +endif > > > > # Normally we fill empty space with 0xff > > quiet_cmd_objcopy = OBJCOPY $@ > > ------------------->8----------------- > > > > Any thoughts? > > I'm largely ok with the above, but: > - You need to exclude CONFIG_NIOS2 in the above as well, or convert the > usage of CONFIG_SYS_MONITOR_BASE to CONFIG_SYS_TEXT_BASE (Thomas?) Looks like NIOS2 builds are not yet supported in TravisCI which is quite unfortunate... are there any instructions on how to build for Nios2 so that I may test my changes before posting them? -Alexey _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot