On Wed, Feb 14, 2018 at 07:25:53PM +0000, York Sun wrote: > Mingkai, > > LS1046ARDB is broken for both QSPI and SD. For QSPI, I cannot use > environmental variables. For SD boot, it fails when trying to init SD > card. Partial log is > > Initializing DDR....using SPD > WARNING: Calling __hwconfig without a buffer and before environment is ready > WARNING: Calling __hwconfig without a buffer and before environment is ready > WARNING: Calling __hwconfig without a buffer and before environment is ready > WARNING: Calling __hwconfig without a buffer and before environment is ready > Trying to boot from MMC1 > unable to select a mode > mmc_init: -524, time 51 > spl: mmc init failed with error: -524 > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > > Please investigate. > > York
This reminds me of the problem I ran into with qemu vexpress-a15. https://lists.denx.de/pipermail/u-boot/2018-February/319965.html https://patchwork.ozlabs.org/patch/871324/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot