Integrate Boot counter for Atmel AT91SAM9XE into Kconfig
Reviewed-by: Lukasz Majewski <lu...@denx.de>
Signed-off-by: Alex Kiernan <alex.kier...@gmail.com>
---
Changes in v2: None
README | 4 ----
drivers/bootcount/Kconfig | 5 +++++
drivers/bootcount/Makefile | 2 +-
3 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/README b/README
index 9eb4f5a..2222aee 100644
--- a/README
+++ b/README
@@ -2306,10 +2306,6 @@ The following options need to be configured:
A better solution is to properly configure the firewall,
but sometimes that is not allowed.
-- bootcount support:
- CONFIG_AT91SAM9XE
- enable special bootcounter support on at91sam9xe based boards.
-
- Show boot progress:
CONFIG_SHOW_BOOT_PROGRESS
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index 8c19ae6..e0d1fc2 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -13,6 +13,7 @@ if BOOTCOUNT_LIMIT
choice
prompt "Boot count device"
default BOOTCOUNT_AM33XX if AM33XX || SOC_DA8XX
+ default BOOTCOUNT_AT91 if AT91SAM9XE
config BOOTCOUNT_EXT
bool "Boot counter on EXT filesystem"
@@ -55,6 +56,10 @@ config BOOTCOUNT_I2C
the bootcounter.
CONFIG_BOOTCOUNT_ALEN = address len
+config BOOTCOUNT_AT91
+ bool "Boot counter for Atmel AT91SAM9XE"
+ depends on AT91SAM9XE
+
endchoice
config SYS_BOOTCOUNT_SINGLEWORD
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index 62bf55e..a3658c1 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -3,7 +3,7 @@
#
obj-y += bootcount.o
-obj-$(CONFIG_AT91SAM9XE) += bootcount_at91.o
+obj-$(CONFIG_BOOTCOUNT_AT91) += bootcount_at91.o
obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o
obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o
obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
