Make SUNXI_NAND select SPL_NAND_SUPPORT in Kconfig, this limit the
number of entries to add in defconfig files when adding NAND support.
For now, the only board using it is the CHIP pro.
Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
---
configs/CHIP_pro_defconfig | 1 -
drivers/mtd/nand/Kconfig | 1 +
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig
index a98bb40c03..5e5fae9a36 100644
--- a/configs/CHIP_pro_defconfig
+++ b/configs/CHIP_pro_defconfig
@@ -1,7 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_SYS_TEXT_BASE=0x4a000000
-CONFIG_SPL_NAND_SUPPORT=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index dcb8ff66ae..75eefc8a2b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -98,6 +98,7 @@ config NAND_SUNXI
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I
select SYS_NAND_SELF_INIT
select SYS_NAND_U_BOOT_LOCATIONS
+ select SPL_NAND_SUPPORT
imply CMD_NAND
---help---
Enable support for NAND. This option enables the standard and
--
2.14.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
