On Thu, Feb 15, 2018 at 8:17 AM, Calvin Johnson <calvin.john...@nxp.com> wrote: > Add configurations for PFE. > > Signed-off-by: Calvin Johnson <calvin.john...@nxp.com> > Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlm...@nxp.com> > --- > Changes in v2: > -Moved SYS_LS_PFE_FW_ADDR from pfe Kconfig to board Kconfigs > -Add "pfe stop" to ls1012a rdb, frdm and 2g5rdb config files > --- > configs/ls1012a2g5rdb_qspi_defconfig | 2 ++ > configs/ls1012afrdm_qspi_defconfig | 2 ++ > configs/ls1012aqds_qspi_defconfig | 2 ++ > configs/ls1012ardb_qspi_defconfig | 2 ++ > drivers/net/Kconfig | 1 + > drivers/net/Makefile | 1 + > drivers/net/pfe_eth/Kconfig | 17 +++++++++++++++++ > drivers/net/pfe_eth/Makefile | 12 ++++++++++++ > include/configs/ls1012a2g5rdb.h | 2 +- > include/configs/ls1012a_common.h | 6 +++--- > include/configs/ls1012afrdm.h | 9 ++++++++- > include/configs/ls1012aqds.h | 14 ++++++++++++++ > include/configs/ls1012ardb.h | 10 +++++++++- > 13 files changed, 74 insertions(+), 6 deletions(-) > create mode 100644 drivers/net/pfe_eth/Kconfig > create mode 100644 drivers/net/pfe_eth/Makefile > > diff --git a/configs/ls1012a2g5rdb_qspi_defconfig > b/configs/ls1012a2g5rdb_qspi_defconfig > index 140a4e1..a979211 100644 > --- a/configs/ls1012a2g5rdb_qspi_defconfig > +++ b/configs/ls1012a2g5rdb_qspi_defconfig > @@ -30,7 +30,9 @@ CONFIG_DM=y > CONFIG_DM_MMC=y > CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > +CONFIG_DM_ETH=y > CONFIG_NETDEVICES=y > +CONFIG_FSL_PFE=y > CONFIG_SYS_NS16550=y > CONFIG_DM_SPI=y > CONFIG_USB=y > diff --git a/configs/ls1012afrdm_qspi_defconfig > b/configs/ls1012afrdm_qspi_defconfig > index 060f073..d0bf081 100644 > --- a/configs/ls1012afrdm_qspi_defconfig > +++ b/configs/ls1012afrdm_qspi_defconfig > @@ -28,8 +28,10 @@ CONFIG_DM=y > # CONFIG_MMC is not set > CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > +CONFIG_DM_ETH=y > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_PFE=y > CONFIG_PCI=y > CONFIG_DM_PCI=y > CONFIG_DM_PCI_COMPAT=y > diff --git a/configs/ls1012aqds_qspi_defconfig > b/configs/ls1012aqds_qspi_defconfig > index 0435d51..40fbdd8 100644 > --- a/configs/ls1012aqds_qspi_defconfig > +++ b/configs/ls1012aqds_qspi_defconfig > @@ -39,8 +39,10 @@ CONFIG_SCSI_AHCI=y > CONFIG_DM_MMC=y > CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > +CONFIG_DM_ETH=y > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_PFE=y > CONFIG_PCI=y > CONFIG_DM_PCI=y > CONFIG_DM_PCI_COMPAT=y > diff --git a/configs/ls1012ardb_qspi_defconfig > b/configs/ls1012ardb_qspi_defconfig > index ea28953..6262351 100644 > --- a/configs/ls1012ardb_qspi_defconfig > +++ b/configs/ls1012ardb_qspi_defconfig > @@ -31,8 +31,10 @@ CONFIG_DM=y > CONFIG_DM_MMC=y > CONFIG_DM_SPI_FLASH=y > CONFIG_SPI_FLASH=y > +CONFIG_DM_ETH=y > CONFIG_NETDEVICES=y > CONFIG_E1000=y > +CONFIG_FSL_PFE=y > CONFIG_PCI=y > CONFIG_DM_PCI=y > CONFIG_DM_PCI_COMPAT=y > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index de1947c..f589978 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -1,4 +1,5 @@ > source "drivers/net/phy/Kconfig" > +source "drivers/net/pfe_eth/Kconfig" > > config DM_ETH > bool "Enable Driver Model for Ethernet drivers" > diff --git a/drivers/net/Makefile b/drivers/net/Makefile > index ac5443c..102e65a 100644 > --- a/drivers/net/Makefile > +++ b/drivers/net/Makefile > @@ -75,3 +75,4 @@ obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o > obj-$(CONFIG_VSC9953) += vsc9953.o > obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o > obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o > +obj-$(CONFIG_FSL_PFE) += pfe_eth/ > diff --git a/drivers/net/pfe_eth/Kconfig b/drivers/net/pfe_eth/Kconfig > new file mode 100644 > index 0000000..6f99710 > --- /dev/null > +++ b/drivers/net/pfe_eth/Kconfig > @@ -0,0 +1,17 @@ > +menuconfig FSL_PFE > + bool "Freescale PFE driver"
Is NXP more appropriate at this point? Or Qualcomm? Or Broadcom? :D Seriously, though, maybe it should include "Ethernet driver". > + help > + This driver provides support for Freescale PFE. It probably makes sense here to spell out the acronym. > + > +if FSL_PFE > + > +config UTIL_PE_DISABLED > + bool > + help > + Disable UTIL processor engine of PFE > + > +config SYS_FSL_PFE_ADDR > + hex "PFE base address" > + default 0x04000000 > + > +endif > diff --git a/drivers/net/pfe_eth/Makefile b/drivers/net/pfe_eth/Makefile > new file mode 100644 > index 0000000..6b5248f > --- /dev/null > +++ b/drivers/net/pfe_eth/Makefile > @@ -0,0 +1,12 @@ > +# Copyright 2015-2016 Freescale Semiconductor, Inc. > +# Copyright 2017 NXP > +# > +# SPDX-License-Identifier:GPL-2.0+ > + > +# Layerscape PFE driver > +obj-y += pfe_cmd.o \ > + pfe_driver.o \ > + pfe_eth.o \ > + pfe_firmware.o \ > + pfe_hw.o \ > + pfe_mdio.o > diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h > index 25df103..2d18f3c 100644 > --- a/include/configs/ls1012a2g5rdb.h > +++ b/include/configs/ls1012a2g5rdb.h > @@ -110,7 +110,7 @@ > > #undef CONFIG_BOOTCOMMAND > #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) > -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ > +#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " > \ > "env exists secureboot && esbc_halt;" > #endif > > diff --git a/include/configs/ls1012a_common.h > b/include/configs/ls1012a_common.h > index 7dbe231..b590d7a 100644 > --- a/include/configs/ls1012a_common.h > +++ b/include/configs/ls1012a_common.h > @@ -118,9 +118,9 @@ > "kernel_size=0x2800000\0" \ > > #undef CONFIG_BOOTCOMMAND > -#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ > - "$kernel_start $kernel_size && "\ > - "bootm $kernel_load" > +#define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load > "\ > + "$kernel_start $kernel_size && "\ > + "bootm $kernel_load" > > /* Monitor Command Prompt */ > #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ > diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h > index 297c057..f54021e 100644 > --- a/include/configs/ls1012afrdm.h > +++ b/include/configs/ls1012afrdm.h > @@ -9,6 +9,13 @@ > > #include "ls1012a_common.h" > > +#ifdef CONFIG_FSL_PFE > +#define EMAC1_PHY_ADDR 0x2 > +#define EMAC2_PHY_ADDR 0x1 > +#define CONFIG_PHYLIB > +#define CONFIG_PHY_REALTEK > +#endif > + > /* DDR */ > #define CONFIG_DIMM_SLOTS_PER_CTLR 1 > #define CONFIG_CHIP_SELECTS_PER_CTRL 1 > @@ -68,7 +75,7 @@ > "$kernel_addr $kernel_size && bootm $load_addr#$board\0" > > #undef CONFIG_BOOTCOMMAND > -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" > +#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" > > #define CONFIG_CMD_MEMINFO > #define CONFIG_CMD_MEMTEST > diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h > index e1767ef..f6c2650 100644 > --- a/include/configs/ls1012aqds.h > +++ b/include/configs/ls1012aqds.h > @@ -9,6 +9,20 @@ > > #include "ls1012a_common.h" > > +/* PFE Ethernet */ > +#ifdef CONFIG_FSL_PFE > +#define EMAC1_PHY_ADDR 0x1e > +#define EMAC2_PHY_ADDR 0x1 > +#define SGMII_2500_PHY1_ADDR 0x1 > +#define SGMII_2500_PHY2_ADDR 0x2 Seems like these 4 could move to Kconfig for PFE, maybe prefixed with PFE. > +#define CONFIG_PHYLIB This is Kconfig. Select it. > +#define CONFIG_PHY_VITESSE > +#define CONFIG_PHY_REALTEK > +#define CONFIG_PHY_AQUANTIA > +#define CONFIG_PHYLIB_10G These are all in Kconfig. Imply them? > +#define RGMII_RESET_WA > +#endif > + > /* DDR */ > #define CONFIG_DIMM_SLOTS_PER_CTLR 1 > #define CONFIG_CHIP_SELECTS_PER_CTRL 1 > diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h > index ced6c5e..3054ba1 100644 > --- a/include/configs/ls1012ardb.h > +++ b/include/configs/ls1012ardb.h > @@ -9,6 +9,14 @@ > > #include "ls1012a_common.h" > > +/* PFE Ethernet */ > +#ifdef CONFIG_FSL_PFE > +#define EMAC1_PHY_ADDR 0x2 > +#define EMAC2_PHY_ADDR 0x1 > +#define CONFIG_PHYLIB > +#define CONFIG_PHY_REALTEK > +#endif > + > /* DDR */ > #define CONFIG_DIMM_SLOTS_PER_CTLR 1 > #define CONFIG_CHIP_SELECTS_PER_CTRL 1 > @@ -102,7 +110,7 @@ > "$kernel_addr $kernel_size && bootm $load_addr#$board\0" > > #undef CONFIG_BOOTCOMMAND > -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" > +#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd;run qspi_bootcmd" > > #include <asm/fsl_secure_boot.h> > > -- > 2.7.4 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot