This series of patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ and CONFIG_ZYNQ_SDHCI_MIN_FREQ and set the default values.
-Changes in V2: -Set min. frequency for ep 100KHz -Branch: u-boot-microblaze/kconfig Vipul Kumar (2): mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ arch/arm/cpu/armv8/zynqmp/Kconfig | 3 +++ arch/arm/mach-zynq/Kconfig | 3 +++ configs/xilinx_zynqmp_ep_defconfig | 2 ++ drivers/mmc/Kconfig | 13 +++++++++++++ drivers/mmc/zynq_sdhci.c | 4 ---- include/configs/xilinx_zynqmp.h | 3 --- include/configs/xilinx_zynqmp_ep.h | 2 -- include/configs/zynq-common.h | 5 ----- 8 files changed, 21 insertions(+), 14 deletions(-) -- 2.7.4 This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
