The Ethernet MAC used in newer Allwinner SoCs (H3, A64, H5) got an
upstream Linux driver in v4.15.
This one uses a slightly different binding from the original one used
by the U-Boot driver.
The differences to the old binding are:
- The "syscon" address is held in a separate node, referenced via a
phandle in the "syscon" property.
- The reference to the PHY is held in a property called "phy-handle",
not "phy".
- The PHY register is at offset 0x30 in the syscon device, not at 0.
- The internal PHY is activated when the node, which phy-handle points
to, is a child node of an "allwinner,sun8i-h3-mdio-internal" node.
Teach the U-Boot driver how to find its resources in a "new-style" DT,
so that we can use a Linux kernel compatible DT for U-Boot as well.
This keeps support for the old binding for now, to allow a smooth
transition.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
drivers/net/sun8i_emac.c | 55 ++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 48 insertions(+), 7 deletions(-)
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index df2b857310..4ba8959239 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -279,7 +279,7 @@ static int sun8i_emac_set_syscon(struct emac_eth_dev *priv)
int ret;
u32 reg;
- reg = readl(priv->sysctl_reg);
+ reg = readl(priv->sysctl_reg + 0x30);
if (priv->variant == H3_EMAC) {
ret = sun8i_emac_set_syscon_ephy(priv, ®);
@@ -310,7 +310,7 @@ static int sun8i_emac_set_syscon(struct emac_eth_dev *priv)
return -EINVAL;
}
- writel(reg, priv->sysctl_reg);
+ writel(reg, priv->sysctl_reg + 0x30);
return 0;
}
@@ -806,17 +806,50 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct
udevice *dev)
#endif
pdata->iobase = devfdt_get_addr_name(dev, "emac");
+ if (pdata->iobase == FDT_ADDR_T_NONE)
+ pdata->iobase = devfdt_get_addr(dev);
+ if (pdata->iobase == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot find MAC base address\n", __func__);
+ return -EINVAL;
+ }
+
priv->sysctl_reg = devfdt_get_addr_name(dev, "syscon");
+ if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
+ const fdt32_t *reg;
+
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
+ if (offset < 0) {
+ debug("%s: cannot find syscon node\n", __func__);
+ return -EINVAL;
+ }
+ reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
+ if (!reg) {
+ debug("%s: cannot find reg property in syscon node\n",
+ __func__);
+ return -EINVAL;
+ }
+ priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
+ offset, reg);
+ } else
+ priv->sysctl_reg -= 0x30;
+ if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot find syscon base address\n", __func__);
+ return -EINVAL;
+ }
pdata->phy_interface = -1;
priv->phyaddr = -1;
priv->use_internal_phy = false;
- offset = fdtdec_lookup_phandle(gd->fdt_blob, node,
- "phy");
- if (offset > 0)
- priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg",
- -1);
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy");
+ if (offset < 0)
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, node,
+ "phy-handle");
+ if (offset < 0) {
+ debug("%s: Cannot find PHY address\n", __func__);
+ return -EINVAL;
+ }
+ priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
@@ -841,6 +874,14 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct
udevice *dev)
if (fdt_getprop(gd->fdt_blob, node,
"allwinner,use-internal-phy", NULL))
priv->use_internal_phy = true;
+ else {
+ int parent = fdt_parent_offset(gd->fdt_blob, offset);
+
+ if (parent >= 0 &&
+ !fdt_node_check_compatible(gd->fdt_blob, parent,
+ "allwinner,sun8i-h3-mdio-internal"))
+ priv->use_internal_phy = true;
+ }
}
priv->interface = pdata->phy_interface;
--
2.14.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
