We want to be able to set the USB device descriptor number iSerial number
or indeed a disk-label unique identifier based on a chip-specific piece of
data for the purposes of differentiating between WaRP7 boards via lsusb
when connected to a host machine.
In order to do this we want to have a serial number encoded in hardware,
which will persist across bootloader, filesystem and config file changes.
This patch utilises OCOTP_TESTER0 AND OCOTP_TESTER1 respectively for this
purpose. OCOTP_TESTER is a unique identifier for each chip representing
31:0 OCOTP_TESTER0 (most significant)
- FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID
OCOTP_TESTER1 (least significant)
31:24
- The X-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID
23:16
- The Y-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID
15:11
- The wafer number of the wafer on which the device was fabricated/SJC
CHALLENGE/ Unique ID
10:0
- FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID
The 64 bits of data generate a unique serial number per-chip.
Signed-off-by: Bryan O'Donoghue <bryan.odonog...@linaro.org>
Cc: Fabio Estevam <fabio.este...@nxp.com>
Reviewed-by: Rui Miguel Silva <rui.si...@linaro.org>
Reviewed-by: Ryan Harkin <ryan.har...@linaro.org>
---
board/warp7/warp7.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c
index d422d63..2cec448 100644
--- a/board/warp7/warp7.c
+++ b/board/warp7/warp7.c
@@ -23,6 +23,7 @@
#include <power/pmic.h>
#include <power/pfuze3000_pmic.h>
#include "../freescale/common/pfuze.h"
+#include <fuse.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -90,6 +91,58 @@ static struct fsl_esdhc_cfg usdhc_cfg[1] = {
{USDHC3_BASE_ADDR},
};
+/*
+ * OCOTP_TESTER
+ * i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1, 08/2016
+ * OCOTP_TESTER describes a unique ID based on silicon wafer
+ * and die X/Y position
+ *
+ * OCOTOP_TESTER offset 0x410
+ * 31:0 fuse 0
+ * FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID
+ *
+ * OCOTP_TESTER1 offset 0x420
+ * 31:24 fuse 1
+ * The X-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID
+ * 23:16 fuse 1
+ * The Y-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique ID
+ * 15:11 fuse 1
+ * The wafer number of the wafer on which the device was fabricated/SJC
+ * CHALLENGE/ Unique ID
+ * 10:0 fuse 1
+ * FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID
+ */
+#define WARP7_USB_SERIALID_BANK 0
+#define WARP7_USB_SERIALID_MSWORD 1
+#define WARP7_USB_SERIALID_LSWORD 2
+
+static int warp7_get_serialid(u64 *id)
+{
+ u32 val;
+ int ret;
+
+ if (!id)
+ return -EINVAL;
+
+ /* Read first word */
+ ret = fuse_read(WARP7_USB_SERIALID_BANK, WARP7_USB_SERIALID_MSWORD,
&val);
+ if (ret)
+ goto done;
+
+ *id = val;
+ *id <<= 32;
+
+ /* Read second word */
+ ret = fuse_read(WARP7_USB_SERIALID_BANK, WARP7_USB_SERIALID_LSWORD,
&val);
+ if (ret)
+ goto done;
+
+ *id |= val;
+
+done:
+ return ret;
+}
+
int board_mmc_getcd(struct mmc *mmc)
{
/* Assume uSDHC3 emmc is always present */
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
