SUN6I_PRCM is also used for SUN8I and SUN9I, so
select the same on respective MACH types.
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.rip...@bootlin.com>
---
arch/arm/mach-sunxi/Kconfig | 2 ++
arch/arm/mach-sunxi/Makefile | 2 --
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 6022d581e4..a4455a6f22 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -182,6 +182,7 @@ config MACH_SUN8I_V3S
config MACH_SUN9I
bool "sun9i (Allwinner A80)"
select CPU_V7
+ select SUN6I_PRCM
select SUNXI_HIGH_SRAM
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
@@ -212,6 +213,7 @@ endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
+ select SUN6I_PRCM
default y if MACH_SUN8I_A23
default y if MACH_SUN8I_A33
default y if MACH_SUN8I_A83T
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 2317b76393..342300e1d7 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -18,8 +18,6 @@ obj-y += usb_phy.o
endif
obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_SUN6I_PRCM) += prcm.o
-obj-$(CONFIG_MACH_SUN8I) += prcm.o
-obj-$(CONFIG_MACH_SUN9I) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += rsb.o
obj-$(CONFIG_MACH_SUN9I) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
--
2.14.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
