remove ifdef'd clock selection code from
serial_mxc.c and replace with call to imx_get_uartclk
Add definitions for imx_get_uartclk to imx31 and imx27
include files.
This makes it easier to add new imx platforms.
Signed-off-by: John Rigby <jcri...@gmail.com>
---
drivers/serial/serial_mxc.c | 6 +-----
include/asm-arm/arch-mx27/clock.h | 2 ++
include/asm-arm/arch-mx31/mx31.h | 1 +
3 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index acc5b7d..7dcedf6 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -166,11 +166,7 @@ DECLARE_GLOBAL_DATA_PTR;
void serial_setbrg (void)
{
-#ifdef CONFIG_MX31
- u32 clk = mx31_get_ipg_clk();
-#else
- u32 clk = imx_get_perclk1();
-#endif
+ u32 clk = imx_get_uartclk();
if (!gd->baudrate)
gd->baudrate = CONFIG_BAUDRATE;
diff --git a/include/asm-arm/arch-mx27/clock.h
b/include/asm-arm/arch-mx27/clock.h
index 5fc75c5..472e8f2 100644
--- a/include/asm-arm/arch-mx27/clock.h
+++ b/include/asm-arm/arch-mx27/clock.h
@@ -36,4 +36,6 @@ ulong imx_get_perclk2(void);
ulong imx_get_perclk3(void);
ulong imx_get_ahbclk(void);
+#define imx_get_uartclk imx_get_perclk1
+
#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
index 53b9f27..3cc4b35 100644
--- a/include/asm-arm/arch-mx31/mx31.h
+++ b/include/asm-arm/arch-mx31/mx31.h
@@ -25,6 +25,7 @@
#define __ASM_ARCH_MX31_H
extern u32 mx31_get_ipg_clk(void);
+#define imx_get_uartclk mx31_get_ipg_clk
extern void mx31_gpio_mux(unsigned long mode);
enum mx31_gpio_direction {
--
1.6.4.2.236.gf324c
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
