SPL copy BootRom boot mode information in TAMP register 21. This TAMP register information is used after relocation to set 2 env variables - boot_device - boot_instance
Signed-off-by: Patrick Delaunay <patrick.delau...@st.com> --- arch/arm/Kconfig | 1 + arch/arm/mach-stm32mp/cpu.c | 92 ++++++++++++++++++++++++++++++ arch/arm/mach-stm32mp/include/mach/stm32.h | 53 +++++++++++++++++ 3 files changed, 146 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 14c13b4..425f533 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1150,6 +1150,7 @@ config ARCH_STI config ARCH_STM32MP bool "Support STMicroelectronics STM32MP Socs with cortex A" + select ARCH_MISC_INIT select BOARD_LATE_INIT select CLK select DM diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c index 3e5ac15..4ba2aec 100644 --- a/arch/arm/mach-stm32mp/cpu.c +++ b/arch/arm/mach-stm32mp/cpu.c @@ -8,6 +8,7 @@ #include <asm/io.h> #include <asm/arch/stm32.h> #include <asm/arch/sys_proto.h> +#include <dm/uclass.h> /* RCC register */ #define RCC_TZCR (STM32_RCC_BASE + 0x00) @@ -40,6 +41,16 @@ #define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16) #define DBGMCU_IDC_REV_ID_SHIFT 16 +/* boot interface from Bootrom + * - boot instance = bit 31:16 + * - boot device = bit 15:0 + */ +#define BOOTROM_PARAM_ADDR 0x2FFC0078 +#define BOOTROM_MODE_MASK GENMASK(15, 0) +#define BOOTROM_MODE_SHIFT 0 +#define BOOTROM_INSTANCE_MASK GENMASK(31, 16) +#define BOOTROM_INSTANCE_SHIFT 16 + #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) static void security_init(void) { @@ -109,6 +120,37 @@ static void dbgmcu_init(void) } #endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */ +static u32 get_bootmode(void) +{ + u32 boot_mode; +#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) + u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR); + u32 bootrom_device, bootrom_instance; + + bootrom_device = + (bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT; + bootrom_instance = + (bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT; + boot_mode = + ((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) | + ((bootrom_instance << BOOT_INSTANCE_SHIFT) & + BOOT_INSTANCE_MASK); + + /* save the boot mode in TAMP backup register */ + clrsetbits_le32(TAMP_BOOT_CONTEXT, + TAMP_BOOT_MODE_MASK, + boot_mode << TAMP_BOOT_MODE_SHIFT); +#else + /* read TAMP backup register */ + boot_mode = (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >> + TAMP_BOOT_MODE_SHIFT; +#endif + return boot_mode; +} + +/* + * Early system init + */ int arch_cpu_init(void) { /* early armv7 timer init: needed for polling */ @@ -119,6 +161,8 @@ int arch_cpu_init(void) security_init(); #endif + /* get bootmode from BootRom context: saved in TAMP register */ + get_bootmode(); return 0; } @@ -178,6 +222,54 @@ int print_cpuinfo(void) } #endif /* CONFIG_DISPLAY_CPUINFO */ +static void setup_boot_mode(void) +{ + char cmd[60]; + u32 boot_ctx = readl(TAMP_BOOT_CONTEXT); + u32 boot_mode = + (boot_ctx & TAMP_BOOT_MODE_MASK) >> TAMP_BOOT_MODE_SHIFT; + int instance = (boot_mode & TAMP_BOOT_INSTANCE_MASK) - 1; + + pr_debug("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d\n", + __func__, boot_ctx, boot_mode, instance); + + switch (boot_mode & TAMP_BOOT_DEVICE_MASK) { + case BOOT_SERIAL_UART: + sprintf(cmd, "%d", instance); + env_set("boot_device", "uart"); + env_set("boot_instance", cmd); + break; + case BOOT_SERIAL_USB: + env_set("boot_device", "usb"); + env_set("boot_instance", "0"); + break; + case BOOT_FLASH_SD: + case BOOT_FLASH_EMMC: + sprintf(cmd, "%d", instance); + env_set("boot_device", "mmc"); + env_set("boot_instance", cmd); + break; + case BOOT_FLASH_NAND: + env_set("boot_device", "nand"); + env_set("boot_instance", "0"); + break; + case BOOT_FLASH_NOR: + env_set("boot_device", "nor"); + env_set("boot_instance", "0"); + break; + default: + pr_debug("unexpected boot mode = %x\n", boot_mode); + break; + } +} + +int arch_misc_init(void) +{ + setup_boot_mode(); + + return 0; +} + void reset_cpu(ulong addr) { } diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index ffbe0b1..40faeb0 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -24,4 +24,57 @@ #define STM32_DDR_BASE 0xC0000000 #define STM32_DDR_SIZE SZ_1G +#ifndef __ASSEMBLY__ + +/* + * enumerated for boot interface from Bootrom, used in TAMP_BOOT_CONTEXT + * - boot device = bit 8:4 + * - boot instance = bit 3:0 + */ +#define BOOT_TYPE_MASK 0xF0 +#define BOOT_TYPE_SHIFT 4 +#define BOOT_INSTANCE_MASK 0x0F +#define BOOT_INSTANCE_SHIFT 0 + +enum boot_device { + BOOT_FLASH_SD = 0x10, + BOOT_FLASH_SD_1 = 0x11, + BOOT_FLASH_SD_2 = 0x12, + BOOT_FLASH_SD_3 = 0x13, + + BOOT_FLASH_EMMC = 0x20, + BOOT_FLASH_EMMC_1 = 0x21, + BOOT_FLASH_EMMC_2 = 0x22, + BOOT_FLASH_EMMC_3 = 0x23, + + BOOT_FLASH_NAND = 0x30, + BOOT_FLASH_NAND_FMC = 0x31, + + BOOT_FLASH_NOR = 0x40, + BOOT_FLASH_NOR_QSPI = 0x41, + + BOOT_SERIAL_UART = 0x50, + BOOT_SERIAL_UART_1 = 0x51, + BOOT_SERIAL_UART_2 = 0x52, + BOOT_SERIAL_UART_3 = 0x53, + BOOT_SERIAL_UART_4 = 0x54, + BOOT_SERIAL_UART_5 = 0x55, + BOOT_SERIAL_UART_6 = 0x56, + BOOT_SERIAL_UART_7 = 0x57, + BOOT_SERIAL_UART_8 = 0x58, + + BOOT_SERIAL_USB = 0x60, + BOOT_SERIAL_USB_OTG = 0x62, +}; + +/* TAMP registers */ +#define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x) +#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(20) + +#define TAMP_BOOT_MODE_MASK GENMASK(15, 8) +#define TAMP_BOOT_MODE_SHIFT 8 +#define TAMP_BOOT_DEVICE_MASK GENMASK(7, 4) +#define TAMP_BOOT_INSTANCE_MASK GENMASK(3, 0) + +#endif /* __ASSEMBLY__*/ #endif /* _MACH_STM32_H_ */ -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot