Hi Fabio > -----Original Message----- > From: Fabio Estevam [mailto:feste...@gmail.com] > Sent: 2018年3月21日 3:47 > To: Peng Fan <van.free...@gmail.com> > Cc: Peng Fan <peng....@nxp.com>; Fabio Estevam <fabio.este...@nxp.com>; > U-Boot-Denx <u-boot@lists.denx.de> > Subject: Re: [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support > > Hi Peng, > > On Fri, Feb 23, 2018 at 3:02 AM, Peng Fan <van.free...@gmail.com> wrote: > > > > > I was a bit busy on other things. Regarding the board support, I still > > do not have a good idea about the DDR things. I am thinking moving the > > ddr code out into a dedicated bin file and pad to the end of SPL. > > > > What do you think? > > Or maybe move the files below to a common mx8m location? > > board/freescale/mx8mq_evk/ddr/ddr_init.c > board/freescale/mx8mq_evk/ddr/ddrphy_train.c > board/freescale/mx8mq_evk/ddr/helper.c The thing is that the magic code there and need each board has a copy. I am rewriting code according to RPA and ddrtool, but progress is slow. I am not ddr expert, the best choice to me is to move the code out Uboot, but there is no good place to put the code. > > Still hoping we can get mx8mevk support for v2018.05 :-) I try.
Thanks, Peng. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot