Adding CONFIG_WARP7_ROOT_PART allows a defconfig to specify which partition
is use as the root partition on WaRP7, this is a desirable change in order
to support a different partitioning schemes. The default is the current
partition #1.
Signed-off-by: Bryan O'Donoghue <bryan.odonog...@linaro.org>
---
board/warp7/Kconfig | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/board/warp7/Kconfig b/board/warp7/Kconfig
index 00df19d..c089bca 100644
--- a/board/warp7/Kconfig
+++ b/board/warp7/Kconfig
@@ -6,6 +6,14 @@ config SYS_BOARD
config SYS_CONFIG_NAME
default "warp7"
+config WARP7_ROOT_PART
+ int "Partition number to use for root filesystem"
+ default 2
+ help
+ The partition number to use for root filesystem this is the
+ partition that is typically specified with root=/dev/sdaX or
+ which gets converted into a root=PARTUUID=some_uuid.
+
config SYS_FDT_ADDR
hex "FDT load address"
default 0x83000000
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
