Without armv8_setup_psci register VBAR_EL3 is not set up property which
makes SMC calls jump to invalid location.
smp_kick_all_cpus is required to make slave cpus leave gic_wait_for_interrupt.
Without this they will never pursue booting process.
Fix was applied to the two ways of booting VxWorks: bootvx and bootm commands.
This implementation is very similiar to what is done in boot_jump_linux
in arch/arm/lib/bootm.c file.
Tested on VxWorks 7 release SR0520 2017-12-08.
Signed-off-by: Vasyl Vavrychuk <vasyl.vavryc...@globallogic.com>
---
arch/arm/lib/bootm.c | 5 +++++
cmd/elf.c | 5 +++++
2 files changed, 10 insertions(+)
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index cfc236f964..91a64bec34 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -448,6 +448,11 @@ void boot_prep_vxworks(bootm_headers_t *images)
}
void boot_jump_vxworks(bootm_headers_t *images)
{
+#if defined(CONFIG_ARM64) && defined(CONFIG_ARMV8_PSCI)
+ armv8_setup_psci();
+ smp_kick_all_cpus();
+#endif
+
/* ARM VxWorks requires device tree physical address to be passed */
((void (*)(void *))images->ep)(images->ft_addr);
}
diff --git a/cmd/elf.c b/cmd/elf.c
index 5b59fc6329..b476202908 100644
--- a/cmd/elf.c
+++ b/cmd/elf.c
@@ -368,6 +368,11 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char *
const argv[])
printf("## Starting vxWorks at 0x%08lx ...\n", addr);
dcache_disable();
+#if defined(CONFIG_ARM64) && defined(CONFIG_ARMV8_PSCI)
+ armv8_setup_psci();
+ smp_kick_all_cpus();
+#endif
+
#ifdef CONFIG_X86
/* VxWorks on x86 uses stack to pass parameters */
((asmlinkage void (*)(int))addr)(0);
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
