Hi Bryan, 2018-04-02 19:42 GMT-03:00 Bryan O'Donoghue <bryan.odonog...@linaro.org>: > This patch enables CONFIG_BOOTM_TEE. Once enabled its possible to > chain-load Linux through OPTEE. > > Loading kernel to 0x80800000 > => run loadimage > > Load FDT to 0x83000000 > => run loadfdt > > Load OPTEE to 0x84000000 > => fatload mmc 0:5 0x84000000 /lib/firmware/uTee.optee > > Then chain-load to the kernel via OPTEE > > => bootm 0x84000000 - 0x83000000 > > Image Name: > Image Type: ARM Trusted Execution Environment Kernel Image (uncompressed) > Data Size: 249844 Bytes = 244 KiB > Load Address: 9dffffe4 > Entry Point: 9e000000 > Verifying Checksum ... OK > Loading Kernel Image ... OK
I'm seeing the following cache misaligned operation warning in my environment, did I miss something on my OPTEE build? => bootm 0x84000000 - 0x83000000 ## Booting kernel from Legacy Image at 84000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 274844 Bytes = 268.4 KiB Load Address: 9dffffe4 Entry Point: 9e000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK CACHE: Misaligned operation at range [9dffffe4, 9e0431a4] Using Device Tree in place at 83000000, end 830095b6 Thanks, Breno Lima _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot