We prefer to use ARM arch timer instead of rockchip timer, so that we are using the same timer for SPL, U-Boot and Kernel, which will make things simple and easy to track to boot time.
Signed-off-by: Kever Yang <[email protected]> --- arch/arm/mach-rockchip/Makefile | 2 +- arch/arm/mach-rockchip/rk322x-board-spl.c | 19 ++++++++++++++++--- include/configs/rk322x_common.h | 6 +++--- 3 files changed, 20 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 096dbac..c1eeefb 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -40,7 +40,7 @@ endif obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o ifndef CONFIG_ARM64 -ifndef CONFIG_ROCKCHIP_RK3188 +ifeq ($(CONFIG_ROCKCHIP_RK3188)$(CONFIG_ROCKCHIP_RK322X),) obj-y += rk_timer.o endif endif diff --git a/arch/arm/mach-rockchip/rk322x-board-spl.c b/arch/arm/mach-rockchip/rk322x-board-spl.c index d3d0446..b5b178f 100644 --- a/arch/arm/mach-rockchip/rk322x-board-spl.c +++ b/arch/arm/mach-rockchip/rk322x-board-spl.c @@ -14,7 +14,6 @@ #include <asm/arch/cru_rk322x.h> #include <asm/arch/grf_rk322x.h> #include <asm/arch/hardware.h> -#include <asm/arch/timer.h> #include <asm/arch/uart.h> u32 spl_boot_device(void) @@ -62,6 +61,17 @@ void board_debug_uart_init(void) CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT); } +void rockchip_stimer_init(void) +{ + asm volatile("mcr p15, 0, %0, c14, c0, 0" + : : "r"(COUNTER_FREQUENCY)); + + writel(0, CONFIG_ROCKCHIP_STIMER_BASE + 0x10); + writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE); + writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4); + writel(1, CONFIG_ROCKCHIP_STIMER_BASE + 0x10); +} + #define SGRF_DDR_CON0 0x10150000 void board_init_f(ulong dummy) { @@ -85,8 +95,11 @@ void board_init_f(ulong dummy) hang(); } - rockchip_timer_init(); - printf("timer init done\n"); + /* Init secure timer */ + rockchip_stimer_init(); + /* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */ + timer_init(); + ret = uclass_get_device(UCLASS_RAM, 0, &dev); if (ret) { printf("DRAM init failed: %d\n", ret); diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index b437b85..8f8a1ef 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -14,9 +14,9 @@ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ -#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000) -#define CONFIG_SYS_TIMER_BASE 0x110c00a0 /* TIMER5 */ -#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) +#define COUNTER_FREQUENCY 24000000 +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_NS16550_MEM32 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
