Hi Guillaume, On Mon, Apr 16, 2018 at 02:47:38PM +0200, Guillaume GARDET wrote: > Boot tested with boot.scr script and EFI/Grub2 on mmc0 and mmc1 slots on > sabrelite board. > > Signed-off-by: Guillaume GARDET <guillaume.gar...@free.fr> > Cc: Troy Kisky <troy.ki...@boundarydevices.com> > Cc: Stefano Babic <sba...@denx.de> > Cc: Fabio Estevam <fabio.este...@nxp.com> > Cc: Gary Bisson <gary.bis...@boundarydevices.com> > > --- > configs/mx6qsabrelite_defconfig | 15 +++++---------- > 1 file changed, 5 insertions(+), 10 deletions(-) > > diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig > index 7499704058..fee33cfff1 100644 > --- a/configs/mx6qsabrelite_defconfig > +++ b/configs/mx6qsabrelite_defconfig > @@ -3,15 +3,15 @@ CONFIG_ARCH_MX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_NITROGEN6X=y > CONFIG_CMD_HDMIDETECT=y > +CONFIG_DISTRO_DEFAULTS=y > > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE" > CONFIG_BOOTDELAY=3 > +# CONFIG_USE_BOOTCOMMAND is not set > CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > -CONFIG_SUPPORT_RAW_INITRD=y > +CONFIG_ARCH_MISC_INIT=y
The above config breaks the build since there's no arch_misc_init function in the board file. > CONFIG_BOARD_EARLY_INIT_F=y > -CONFIG_HUSH_PARSER=y > CONFIG_FASTBOOT=y > CONFIG_FASTBOOT_BUF_ADDR=0x12000000 > -CONFIG_CMD_BOOTZ=y > CONFIG_CMD_MEMTEST=y > CONFIG_SYS_ALT_MEMTEST=y > # CONFIG_CMD_FLASH is not set Also, can you add CMD_GPT so that GPT parition tables are supported? Many of our OS images now rely on it. Regards, Gary _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
