From: Sanchayan Maity <[email protected]> Trying to boot from an ext4 rootfs fails due to us defaulting to ext3. While the downstream T20/T30 L4T kernel has issues with ext4 later TK1 L4T should work just fine with it. Hence enable ext4 for sdboot and usbboot on TK1.
Signed-off-by: Sanchayan Maity <[email protected]> Acked-by: Marcel Ziswiler <[email protected]> --- Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None include/configs/apalis-tk1.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index f9970b81dc..0b533d0d09 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -81,7 +81,7 @@ "&& setenv dtbparam ${fdt_addr_r}\0" #define SD_BOOTCMD \ - "sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext3 rootwait\0" \ + "sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \ "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ "${vidargs}; echo Booting from SD card in 8bit slot...; " \ "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ @@ -92,7 +92,7 @@ "&& setenv dtbparam ${fdt_addr_r}\0" #define USB_BOOTCMD \ - "usbargs=ip=off root=/dev/sda2 rw rootfstype=ext3 rootwait\0" \ + "usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \ "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ -- 2.14.3 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
