This series rework of previous version where it removes legacy usb phy handling and added phy driver on generic-phy framework.
Current implementation phy driver is unable to get pinctrl, clock and reset details from DT since the dm code on these will add it future. Changes for v7: - rebase on master Changes for v6: - Create private config for passing through driver_data instead directly passing musb_config. This make room for adding new configs in coming patches. - memset to pdata in musb-new/sunxi.c Changes for v5: - Rework of previous series - Used driver_data on sunxi.c since dt supported - tested on bpi-m2-plus, orangepi_pc2/prime, bananapi-m64 Changes for v4: - Rework of previous series - Add Allwinner sun4i USB PHY driver - Drop legacy arch/arm/mach-sunxi/usb_phy.c and related code Chen-Yu Tsai (1): sunxi: clock: Fix OHCI clock gating for H3/H5 Jagan Teki (33): usb: sunxi: Simplify ccm reg base code musb: sunxi: Add proper macros instead of numericals musb: sunxi: Use simple way to fill musb_hdrc pdata musb: sunxi: Add fifo config sunxi: clock: Fix clock gating for H3/H5/A64 musb: sunxi: Add OTG device clkgate and reset for H3/H5 musb: sunxi: Use BIT instead of numerical shift musb: sunxi: Add support for H3/H5A64 phy: Add Allwinner A64 USB PHY driver phy: sun4i-usb: Add id_detect and vbus_detect ops phy: sun4i-usb: Add H3/H5 PHY config phy: sun4i-usb: Add V3S PHY config phy: sun4i-usb: Add A83T USB PHY config phy: sun4i-usb: Add A10/A13/A20 PHY config phy: sun4i-usb: Add A31 PHY config phy: sun4i-usb: Add A33 USB PHY config phy: sun4i-usb: Add A23 USB PHY config device-tree-bindings: phy: Sync sun4i-usb-phy bindings board: sunxi: Use generic-phy for board_usb_cable_connected phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect usb: sunxi: Switch to use generic-phy sunxi: Drop legacy usb_phy.c arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux configs: bananapi-m64: Enable USB OTG peripheral mode ARM: dts: sun8i: a83t: Sync usbphy node from Linux arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux configs: bananapi-m2-plus: Enable USB OTG peripheral mode arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux configs: orangepi-pc2: Enable USB OTG peripheral mode arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux configs: orangepi-prime: Enable USB OTG peripheral mode Jun Nie (1): sunxi: h3: Sync OTG and HCI nodes from Linux DT arch/arm/dts/sun50i-a64-bananapi-m64.dts | 26 ++ arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 59 ++- arch/arm/dts/sun50i-h5-orangepi-prime.dts | 13 + arch/arm/dts/sun8i-a83t.dtsi | 20 + arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts | 13 + arch/arm/dts/sun8i-h3.dtsi | 32 ++ arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 23 +- arch/arm/include/asm/arch-sunxi/usb_phy.h | 21 - arch/arm/mach-sunxi/Kconfig | 9 + arch/arm/mach-sunxi/Makefile | 3 - arch/arm/mach-sunxi/usb_phy.c | 407 ----------------- board/sunxi/board.c | 40 +- configs/Sinovoip_BPI_M2_Plus_defconfig | 1 + configs/bananapi_m64_defconfig | 1 + configs/orangepi_pc2_defconfig | 1 + configs/orangepi_prime_defconfig | 1 + doc/device-tree-bindings/phy/sun4i-usb-phy.txt | 65 +++ drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/phy/allwinner/Kconfig | 13 + drivers/phy/allwinner/Makefile | 6 + drivers/phy/allwinner/phy-sun4i-usb.c | 575 +++++++++++++++++++++++++ drivers/usb/host/ehci-sunxi.c | 66 ++- drivers/usb/host/ohci-sunxi.c | 72 +++- drivers/usb/musb-new/musb_core.h | 4 + drivers/usb/musb-new/musb_regs.h | 3 +- drivers/usb/musb-new/musb_uboot.c | 22 +- drivers/usb/musb-new/sunxi.c | 228 ++++++++-- include/phy-sun4i-usb.h | 34 ++ 29 files changed, 1191 insertions(+), 570 deletions(-) delete mode 100644 arch/arm/include/asm/arch-sunxi/usb_phy.h delete mode 100644 arch/arm/mach-sunxi/usb_phy.c create mode 100644 doc/device-tree-bindings/phy/sun4i-usb-phy.txt create mode 100644 drivers/phy/allwinner/Kconfig create mode 100644 drivers/phy/allwinner/Makefile create mode 100644 drivers/phy/allwinner/phy-sun4i-usb.c create mode 100644 include/phy-sun4i-usb.h -- 2.14.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot