On Sat, 12 May 2018 05:49:47 +0000 Alex Kiernan <alex.kier...@gmail.com> wrote:
> Add a command to manipulate the bootcounter. This is useful if you can
> run device recovery from inside U-Boot and need to reset the
> bootcounter after executing that process as part of altbootcmd.
>
> Signed-off-by: Alex Kiernan <alex.kier...@gmail.com>
> ---
>
> cmd/Kconfig | 7 +++++++
> cmd/Makefile | 1 +
> cmd/bootcount.c | 61
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files
> changed, 69 insertions(+) create mode 100644 cmd/bootcount.c
>
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index eb14e08..825d4ad 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -1218,6 +1218,13 @@ config CMD_BMP
> the image into RAM, then using this command to look at it
> or display it.
>
> +config CMD_BOOTCOUNT
> + bool "bootcount"
> + depends on BOOTCOUNT_LIMIT
> + help
> + Enable the bootcount command, which allows interrogation
> and
> + reset of the bootcounter.
> +
> config CMD_BSP
> bool "Enable board-specific commands"
> help
> diff --git a/cmd/Makefile b/cmd/Makefile
> index 0d7322e..c05dc2b 100644
> --- a/cmd/Makefile
> +++ b/cmd/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
> obj-$(CONFIG_CMD_BINOP) += binop.o
> obj-$(CONFIG_CMD_BLOCK_CACHE) += blkcache.o
> obj-$(CONFIG_CMD_BMP) += bmp.o
> +obj-$(CONFIG_CMD_BOOTCOUNT) += bootcount.o
> obj-$(CONFIG_CMD_BOOTEFI) += bootefi.o
> obj-$(CONFIG_CMD_BOOTMENU) += bootmenu.o
> obj-$(CONFIG_CMD_BOOTSTAGE) += bootstage.o
> diff --git a/cmd/bootcount.c b/cmd/bootcount.c
> new file mode 100644
> index 0000000..c358418
> --- /dev/null
> +++ b/cmd/bootcount.c
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +#include <common.h>
> +#include <command.h>
> +#include <bootcount.h>
> +
> +static int do_bootcount_print(cmd_tbl_t *cmdtp, int flag, int argc,
> + char * const argv[])
> +{
> + printf("%lu\n", bootcount_load());
> + return CMD_RET_SUCCESS;
> +}
> +
> +static int do_bootcount_reset(cmd_tbl_t *cmdtp, int flag, int argc,
> + char * const argv[])
> +{
> + /*
> + * note that we're explicitly not resetting the environment
> + * variable, so you still have the old bootcounter available
> + */
> + bootcount_store(0);
> + return CMD_RET_SUCCESS;
> +}
> +
> +static cmd_tbl_t bootcount_sub[] = {
> + U_BOOT_CMD_MKENT(print, 1, 1, do_bootcount_print, "", ""),
> + U_BOOT_CMD_MKENT(reset, 1, 1, do_bootcount_reset, "", ""),
> +};
> +
> +static int do_bootcount(cmd_tbl_t *cmdtp, int flag, int argc,
> + char * const argv[])
> +{
> + cmd_tbl_t *cp;
> +
> + if (argc < 2)
> + return CMD_RET_USAGE;
> +
> + /* drop initial "bootcount" arg */
> + argc--;
> + argv++;
> +
> + cp = find_cmd_tbl(argv[0], bootcount_sub,
> ARRAY_SIZE(bootcount_sub));
> + if (cp)
> + return cp->cmd(cmdtp, flag, argc, argv);
> +
> + return CMD_RET_USAGE;
> +}
> +
> +#if CONFIG_IS_ENABLED(SYS_LONGHELP)
> +static char bootcount_help_text[] =
> + "print - print current bootcounter\n"
> + "reset - reset the bootcounter"
> + ;
> +#endif
> +
> +U_BOOT_CMD(bootcount, 2, 1, do_bootcount,
> + "bootcount",
> +#if CONFIG_IS_ENABLED(SYS_LONGHELP)
> + bootcount_help_text
> +#endif
> +);
Reviewed-by: Lukasz Majewski <lu...@denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
pgp3SOA0dKfTj.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
