On 2/9/2010 1:04 PM, Maxim Podbereznyi wrote: > Hi Ben! > > I've made LAN8720 work with AT91SAM9G45 MPU. The problem was in a > wrong address assigning during the PHY reset. The PHY has internal > pull-down on the PHYAD0 line but the init code for AT91 turns off > processor's pull-up during PHY reset only for a few lines and they are > not PHYAD0. So I disabled also the processor's pull-up to the right > line and the PHY got alive. I've tested tftp - works perfect! > > Thank you for the help! > You're welcome. Congratulations!
--Ben _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
