Signed-off-by: Alexey Brodkin <abrod...@synopsys.com>
---
 drivers/serial/Kconfig      |  9 +++++++++
 drivers/serial/serial_arc.c | 26 ++++++++++++++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1aab0320f676..877790986081 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -197,6 +197,15 @@ config DEBUG_UART_AR933X
          driver will be available until the real driver model serial is
          running.
 
+config DEBUG_ARC_SERIAL
+       bool "ARC UART"
+       depends on ARC_SERIAL
+       help
+         Select this to enable a debug UART using the ARC UART driver.
+         You will need to provide parameters to make this work. The
+         driver will be available until the real driver model serial is
+         running.
+
 config DEBUG_UART_ATMEL
        bool "Atmel USART"
        help
diff --git a/drivers/serial/serial_arc.c b/drivers/serial/serial_arc.c
index da4a07ab2f66..925f0c255544 100644
--- a/drivers/serial/serial_arc.c
+++ b/drivers/serial/serial_arc.c
@@ -130,3 +130,29 @@ U_BOOT_DRIVER(serial_arc) = {
        .ops    = &arc_serial_ops,
        .flags = DM_FLAG_PRE_RELOC,
 };
+
+#ifdef CONFIG_DEBUG_ARC_SERIAL
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
+{
+       struct arc_serial_regs *regs = (struct arc_serial_regs 
*)CONFIG_DEBUG_UART_BASE;
+       int arc_console_baud = CONFIG_DEBUG_UART_CLOCK / (CONFIG_BAUDRATE * 4) 
- 1;
+
+       writeb(arc_console_baud & 0xff, &regs->baudl);
+       writeb((arc_console_baud & 0xff00) >> 8, &regs->baudh);
+}
+
+static inline void _debug_uart_putc(int c)
+{
+       struct arc_serial_regs *regs = (struct arc_serial_regs 
*)CONFIG_DEBUG_UART_BASE;
+
+       while (!(readb(&regs->status) & UART_TXEMPTY))
+               ;
+
+       writeb(c, &regs->data);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
-- 
2.17.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to