On 28/05/2018 12:25, Michal Simek wrote:
Hi,
On 28.5.2018 11:47, Jean-Jacques Hiblot wrote:
Hi Michal
On 28/05/2018 10:32, Michal Simek wrote:
Hi Jean,
On 25.5.2018 11:32, Jean-Jacques Hiblot wrote:
This series aims at bringing improvements to the dwc3_generic driver so
that it can be used by most of the platforms using the dwc3 controller.
I tested this on with DRA7 and AM57x platforms for both Peripheral
and Host
operations. The code to enable DM USB host & dev support for those
platforms will be submitted in a separate series.
Enhancements:
- use separate Kconfig option for DM USB Periphal and DM USB Host. This
allow platforms to keep their non-DM USB peripheral code and use the DM
USB host.
- fixes the bind/probe confusion in dwc3_generic. The probe is done when
the USB device is first needed.
- handles PHYs when in the peripheral mode. The code to handle the
PHYs is
shared with the host side
- handles clock and reset
- bind host controller to the more generic driver 'xhci-dwc3'
I see two series which were sent recently without any description of
dependencies.
Right I forgot. This series applies on to of the master branch of the
USB tree
Will be good to push these patches somewhere to git and send a link that
I can easily test.
I pushed all on github : https://github.com/jjhiblot/u-boot
I didn't build all patches to identify which one is introducing the
issue. But look below at issues and please fix them. Then I will test.
The CONFIG_DM_USB_DEV is missing from configuration.
This will be fixed in v2
Thanks,
Michal
[u-boot](dwc3)$ nice -n 19 ./tools/buildman/buildman -b dwc3 zynqmp -o
../tmp/ -C -I -c 1 -sSed
boards.cfg is up to date. Nothing to do.
Summary of 1 commit for 20 boards (8 threads, 1 job per thread)
01: board: ti: am57xx: remove USB platform code
aarch64: + xilinx_zynqmp_zc1751_xm016_dc2
xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu100_revC
xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zc1751_xm017_dc3
xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu106_revA
xilinx_zynqmp_zc1751_xm015_dc1 xilinx_zynqmp_zcu111_revA
xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu104_revC
+common/built-in.o: In function `run_usb_dnl_gadget':
+build/../common/dfu.c:73: undefined reference to
`usb_gadget_handle_interrupts'
+build/../common/dfu.c:83: undefined reference to
`usb_gadget_handle_interrupts'
+make[1]: *** [u-boot] Error 139
+make: *** [sub-make] Error 2
+ usb_gadget_realease(controller_index);
+ ^~~~~~~~~~~~~~~~~~~
+cmd/built-in.o: In function `do_fastboot':
+build/../cmd/fastboot.c:50: undefined reference to
`usb_gadget_handle_interrupts'
+cmd/built-in.o: In function `do_thor_down':
+build/../cmd/thordown.c:58: undefined reference to `usb_gadget_realease'
+drivers/usb/gadget/built-in.o: In function `thor_rx_data':
+build/../drivers/usb/gadget/f_thor.c:555: undefined reference to
`usb_gadget_handle_interrupts'
+drivers/usb/gadget/built-in.o: In function `thor_tx_data':
+build/../drivers/usb/gadget/f_thor.c:589: undefined reference to
`usb_gadget_handle_interrupts'
+drivers/usb/gadget/built-in.o: In function `thor_init':
+build/../drivers/usb/gadget/f_thor.c:706: undefined reference to
`usb_gadget_handle_interrupts'
w+../cmd/thordown.c: In function ?do_thor_down?:
w+../cmd/thordown.c:58:2: warning: implicit declaration of function
?usb_gadget_realease? [-Wimplicit-function-declaration]
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
