Dear Michael Zaidman, In message <660c0f821002160239w30d02211k66cd1df24c987...@mail.gmail.com> you wrote: > > >> The test blinks the LEDs few times and performs running "1" > >> ilumination. Of course only visual control is possible. The general > > > > This is not acceptable as a POST then. Only sich tests can be used > > where it is possible to automatically detect the test result. Tests > > that require interactive handling or manual inspection as in your case > > do not fit into this setup. ... > Ok, got it. I moved the diagnostics LEDs sanity test into misc_init_f which= > is > called even earlier than post_init_f.
You may of course do that - it's your local code after all. But I tend to believe that this does not make much sense. Interactive tests should be run at a time when interaction is supported, i. e. _after_ relocation to RAM. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Real Programmers always confuse Christmas and Halloween because OCT 31 == DEC 25 ! - Andrew Rutherford (andr...@ucs.adelaide.edu.au) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
