That is necessary for using automatic calibration on A64 eMMC.
Signed-off-by: Vasily khoruzhick <anars...@gmail.com>
---
arch/arm/mach-sunxi/Kconfig | 1 +
drivers/mmc/sunxi_mmc.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 66fb094ac5..8a35033d1f 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -257,6 +257,7 @@ config MACH_SUN50I
select SUNXI_GEN_SUN6I
select SUN6I_PRCM
select SUNXI_HIGH_SRAM
+ select MMC_SUNXI_HAS_NEW_MODE
select SUPPORT_SPL
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index fe6d82c7b4..34739c98b9 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -166,7 +166,9 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv,
unsigned int hz)
if (new_mode) {
#ifdef CONFIG_MMC_SUNXI_HAS_NEW_MODE
+#ifndef CONFIG_MACH_SUN50I
val = CCM_MMC_CTRL_MODE_SEL_NEW;
+#endif
setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
#endif
} else {
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
