Add support for the ARM part of the mgcoge2, named suen3.
This board is based on the Marvell Kirkwood (88F6281) SoC.
As there come more board variants, common code is stored in
board/keymile/km_arm/km_arm.c
Signed-off-by: Holger Brunck <holger.bru...@keymile.com>
Signed-off-by: Stefan Roese <s...@denx.de>
Signed-off-by: Heiko Schocher <h...@denx.de>
---
- changes since v1:
added comments from Wolfgang Denk:
get rid of flash_info_t define in board config
(to get this working patch 1/2 is introduced/needed)
- changes since v2:
added comments from Wolfgang Denk
- rearranged if/else in do_spi_toggle()
- added I/O accessor functions for bootcounter
- changes since v3:
added comment Scott Wood
- removed nand_init in do_spi_toggle()
added comments from Prafulla Wadaskar
- km-arm.h renamed to km_arm.h
- reworked eeprom_write_enable() (deleted it)
(when reviewing this function, it cropped up, that
this pin is connected through a gpio pin, not as
in previous version, through the boco (a FPGA))
- moved set_sda(), set_scl(), get_sda(), get_scl()
to km_arm.c
- split patch in 4 patches (for each board an extra patch)
- renamed sdramregs.txt in kwbimage.cfg, also license
info added.
- changes since v4
added comments from Prafulla Wadaskar
- add comments in board/keymile/km_arm/kwbimage.cfg
- cleanup define CONFIG_KIRKWOOD_GPIO
- corect wrong name at end of config file
- add only support for the suen3 target, others
follow later
---
MAINTAINERS | 2 +-
MAKEALL | 1 +
Makefile | 6 +
board/keymile/common/common.c | 6 +-
board/keymile/km_arm/Makefile | 51 ++++++
board/keymile/km_arm/config.mk | 28 ++++
board/keymile/km_arm/km_arm.c | 323 +++++++++++++++++++++++++++++++++++++
board/keymile/km_arm/kwbimage.cfg | 176 ++++++++++++++++++++
include/configs/km_arm.h | 191 ++++++++++++++++++++++
include/configs/suen3.h | 103 ++++++++++++
10 files changed, 884 insertions(+), 3 deletions(-)
create mode 100644 board/keymile/km_arm/Makefile
create mode 100644 board/keymile/km_arm/config.mk
create mode 100644 board/keymile/km_arm/km_arm.c
create mode 100644 board/keymile/km_arm/kwbimage.cfg
create mode 100644 include/configs/km_arm.h
create mode 100644 include/configs/suen3.h
diff --git a/MAINTAINERS b/MAINTAINERS
index fe63a9f..fe9494c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -409,9 +409,9 @@ Heiko Schocher <h...@denx.de>
muas3001 MPC8270
municse MPC5200
sc3 PPC405GP
+ suen3 ARM926EJS (Kirkwood SoC)
uc101 MPC5200
-
Peter De Schrijver <p...@mind.be>
ML2 PPC4xx
diff --git a/MAKEALL b/MAKEALL
index 684db67..dfac5e4 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -579,6 +579,7 @@ LIST_ARM9=" \
spear310 \
spear320 \
spear600 \
+ suen3 \
trab \
VCMA9 \
versatile \
diff --git a/Makefile b/Makefile
index e4431f7..3ea2b53 100644
--- a/Makefile
+++ b/Makefile
@@ -3047,6 +3050,9 @@ spear320_config : unconfig
spear600_config : unconfig
@$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs
$(@:_config=) spear spear
+suen3_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs km_arm keymile kirkwood
+
SX1_stdout_serial_config \
SX1_config: unconfig
@mkdir -p $(obj)include
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index ec27bda..7b4eefd 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -35,6 +35,7 @@
#include <libfdt.h>
#endif
+#include "../common/common.h"
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
#include <i2c.h>
@@ -421,7 +422,6 @@ static int get_scl (void)
return ((val & SCL_BIT) == SCL_BIT);
}
-
#endif
#if !defined(CONFIG_KMETER1)
@@ -500,7 +500,7 @@ void i2c_init_board(void)
out_8 (&dev->cr, (I2C_CR_MEN));
#else
-#if defined(CONFIG_HARD_I2C)
+#if defined(CONFIG_HARD_I2C) && !defined(CONFIG_MACH_SUEN3)
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
@@ -578,10 +578,12 @@ int fdt_get_node_and_value (void *blob,
}
#endif
+#if !defined(CONFIG_MACH_SUEN3)
int ethernet_present (void)
{
return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) &
0x80);
}
+#endif
int board_eth_init (bd_t *bis)
{
diff --git a/board/keymile/km_arm/Makefile b/board/keymile/km_arm/Makefile
new file mode 100644
index 0000000..fffc6a3
--- /dev/null
+++ b/board/keymile/km_arm/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Prafulla Wadaskar <prafu...@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o ../common/common.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/keymile/km_arm/config.mk b/board/keymile/km_arm/config.mk
new file mode 100644
index 0000000..b9e81b2
--- /dev/null
+++ b/board/keymile/km_arm/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Prafulla Wadaskar <prafu...@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+TEXT_BASE = 0x004000000
+
+# Kirkwood Boot Image configuration file
+KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
new file mode 100644
index 0000000..31610be
--- /dev/null
+++ b/board/keymile/km_arm/km_arm.c
@@ -0,0 +1,323 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafu...@marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, s...@denx.de.
+ *
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, h...@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <nand.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <asm/io.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+
+#include "../common/common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int io_dev;
+extern I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
+
+/* Multi-Purpose Pins Functionality configuration */
+u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_PEX_RST_OUTn,
+#if defined(CONFIG_SOFT_I2C)
+ MPP8_GPIO, /* SDA */
+ MPP9_GPIO, /* SCL */
+#else
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+#endif
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_GPO, /* Reserved */
+ MPP13_UART1_TXD,
+ MPP14_UART1_RXD,
+ MPP15_GPIO, /* Not used */
+ MPP16_GPIO, /* Not used */
+ MPP17_GPIO, /* Reserved */
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GPIO,
+ MPP21_GPIO,
+ MPP22_GPIO,
+ MPP23_GPIO,
+ MPP24_GPIO,
+ MPP25_GPIO,
+ MPP26_GPIO,
+ MPP27_GPIO,
+ MPP28_GPIO,
+ MPP29_GPIO,
+ MPP30_GPIO,
+ MPP31_GPIO,
+ MPP32_GPIO,
+ MPP33_GPIO,
+ MPP34_GPIO, /* CDL1 (input) */
+ MPP35_GPIO, /* CDL2 (input) */
+ MPP36_GPIO, /* MAIN_IRQ (input) */
+ MPP37_GPIO, /* BOARD_LED */
+ MPP38_GPIO, /* Piggy3 LED[1] */
+ MPP39_GPIO, /* Piggy3 LED[2] */
+ MPP40_GPIO, /* Piggy3 LED[3] */
+ MPP41_GPIO, /* Piggy3 LED[4] */
+ MPP42_GPIO, /* Piggy3 LED[5] */
+ MPP43_GPIO, /* Piggy3 LED[6] */
+ MPP44_GPIO, /* Piggy3 LED[7] */
+ MPP45_GPIO, /* Piggy3 LED[8] */
+ MPP46_GPIO, /* Reserved */
+ MPP47_GPIO, /* Reserved */
+ MPP48_GPIO, /* Reserved */
+ MPP49_GPIO, /* SW_INTOUTn */
+ 0
+};
+
+int ethernet_present(void)
+{
+ uchar buf;
+ int ret = 0;
+
+ if (i2c_read(0x10, 2, 1, &buf, 1) != 0) {
+ printf ("%s: Error reading Boco\n", __FUNCTION__);
+ return -1;
+ }
+ if ((buf & 0x40) == 0x40) {
+ ret = 1;
+ }
+ return ret;
+}
+
+int misc_init_r(void)
+{
+ I2C_MUX_DEVICE *i2cdev;
+ char *str;
+ int mach_type;
+
+ /* add I2C Bus for I/O Expander */
+ i2cdev = i2c_mux_ident_muxstring((uchar *)"pca9554a:70:a");
+ io_dev = i2cdev->busid;
+ puts("Piggy:");
+ if (ethernet_present() == 0)
+ puts (" not");
+ puts(" present\n");
+
+ str = getenv("mach_type");
+ if (str != NULL) {
+ mach_type = simple_strtoul(str, NULL, 10);
+ printf("Overwriting MACH_TYPE with %d!!!\n", mach_type);
+ gd->bd->bi_arch_number = mach_type;
+ }
+ return 0;
+}
+
+int board_init(void)
+{
+ u32 tmp;
+
+ kirkwood_mpp_conf(kwmpp_config);
+
+ /*
+ * The FLASH_GPIO_PIN switches between using a
+ * NAND or a SPI FLASH. Set this pin on start
+ * to NAND mode.
+ */
+ tmp = readl(KW_GPIO0_BASE);
+ writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE);
+ tmp = readl(KW_GPIO0_BASE + 4);
+ writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE + 4);
+ printf("KM: setting NAND mode\n");
+
+ /*
+ * arch number of board
+ */
+ gd->bd->bi_arch_number = MACH_TYPE_SUEN3;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+#if defined(CONFIG_SOFT_I2C)
+ /* init the GPIO for I2C Bitbang driver */
+ kw_gpio_set_valid(SUEN3_SDA_PIN, 1);
+ kw_gpio_set_valid(SUEN3_SCL_PIN, 1);
+ kw_gpio_direction_output(SUEN3_SDA_PIN, 0);
+ kw_gpio_direction_output(SUEN3_SCL_PIN, 0);
+#endif
+#if defined(CONFIG_SYS_EEPROM_WREN)
+ kw_gpio_set_valid(SUEN3_ENV_WP, 38);
+ kw_gpio_direction_output(SUEN3_ENV_WP, 1);
+#endif
+ return 0;
+}
+
+#if defined(CONFIG_CMD_SF)
+int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ u32 tmp;
+ if (argc < 2) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ if ((strcmp(argv[1], "off") == 0)) {
+ printf("SPI FLASH disabled, NAND enabled\n");
+ /* Multi-Purpose Pins Functionality configuration */
+ kwmpp_config[0] = MPP0_NF_IO2;
+ kwmpp_config[1] = MPP1_NF_IO3;
+ kwmpp_config[2] = MPP2_NF_IO4;
+ kwmpp_config[3] = MPP3_NF_IO5;
+
+ kirkwood_mpp_conf(kwmpp_config);
+ tmp = readl(KW_GPIO0_BASE);
+ writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE);
+ } else if ((strcmp(argv[1], "on") == 0)) {
+ printf("SPI FLASH enabled, NAND disabled\n");
+ /* Multi-Purpose Pins Functionality configuration */
+ kwmpp_config[0] = MPP0_SPI_SCn;
+ kwmpp_config[1] = MPP1_SPI_MOSI;
+ kwmpp_config[2] = MPP2_SPI_SCK;
+ kwmpp_config[3] = MPP3_SPI_MISO;
+
+ kirkwood_mpp_conf(kwmpp_config);
+ tmp = readl(KW_GPIO0_BASE);
+ writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE);
+ } else {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ spitoggle, 2, 0, do_spi_toggle,
+ "En-/disable SPI FLASH access",
+ "<on|off> - Enable (on) or disable (off) SPI FLASH access\n"
+ );
+#endif
+
+int dram_init(void)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ gd->bd->bi_dram[i].start = kw_sdram_bar(i);
+ gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i),
+ kw_sdram_bs(i));
+ }
+ return 0;
+}
+
+/* Configure and enable MV88E1118 PHY */
+void reset_phy(void)
+{
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* reset the phy */
+ miiphy_reset(name, CONFIG_PHY_BASE_ADR);
+}
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+int hush_init_var (void)
+{
+ ivm_read_eeprom ();
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_BOOTCOUNT_LIMIT)
+void bootcount_store (ulong a)
+{
+ volatile ulong *save_addr;
+ volatile ulong size = 0;
+ int i;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ size += gd->bd->bi_dram[i].size;
+ }
+ save_addr = (ulong*)(size - BOOTCOUNT_ADDR);
+ writel(a, save_addr);
+ writel(BOOTCOUNT_MAGIC, &save_addr[1]);
+}
+
+ulong bootcount_load (void)
+{
+ volatile ulong *save_addr;
+ volatile ulong size = 0;
+ int i;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ size += gd->bd->bi_dram[i].size;
+ }
+ save_addr = (ulong*)(size - BOOTCOUNT_ADDR);
+ if (readl(&save_addr[1]) != BOOTCOUNT_MAGIC)
+ return 0;
+ else
+ return readl(save_addr);
+}
+#endif
+
+#if defined(CONFIG_SOFT_I2C)
+void set_sda (int state)
+{
+ I2C_ACTIVE;
+ I2C_SDA(state);
+}
+
+void set_scl (int state)
+{
+ I2C_SCL(state);
+}
+
+int get_sda (void)
+{
+ I2C_TRISTATE;
+ return I2C_READ;
+}
+
+int get_scl (void)
+{
+ return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0);
+}
+#endif
+
+#if defined(CONFIG_SYS_EEPROM_WREN)
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+ kw_gpio_set_value(SUEN3_ENV_WP, !state);
+
+ return !kw_gpio_get_value(SUEN3_ENV_WP);
+}
+#endif
diff --git a/board/keymile/km_arm/kwbimage.cfg
b/board/keymile/km_arm/kwbimage.cfg
new file mode 100644
index 0000000..6b8a7ee
--- /dev/null
+++ b/board/keymile/km_arm/kwbimage.cfg
@@ -0,0 +1,176 @@
+#
+# (C) Copyright 2010
+# Heiko Schocher, DENX Software Engineering, h...@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM spi # Boot from SPI flash
+
+DATA 0xFFD10000 0x01111111 # MPP Control 0 Register
+# bit 3-0: MPPSel0 1, NF_IO[2]
+# bit 7-4: MPPSel1 1, NF_IO[3]
+# bit 12-8: MPPSel2 1, NF_IO[4]
+# bit 15-12: MPPSel3 1, NF_IO[5]
+# bit 19-16: MPPSel4 1, NF_IO[6]
+# bit 23-20: MPPSel5 1, NF_IO[7]
+# bit 27-24: MPPSel6 1, SYSRST_O
+# bit 31-28: MPPSel7 0, GPO[7]
+
+DATA 0xFFD10008 0x00001100 # MPP Control 2 Register
+# bit 3-0: MPPSel16 0, GPIO[16]
+# bit 7-4: MPPSel17 0, GPIO[17]
+# bit 12-8: MPPSel18 1, NF_IO[0]
+# bit 15-12: MPPSel19 1, NF_IO[1]
+# bit 19-16: MPPSel20 0, GPIO[20]
+# bit 23-20: MPPSel21 0, GPIO[21]
+# bit 27-24: MPPSel22 0, GPIO[22]
+# bit 31-28: MPPSel23 0, GPIO[23]
+
+DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register
+DATA 0xFFD20134 0xBBBBBBBB # L2 RAM Timing 0 Register
+DATA 0xFFD20138 0x00BBBBBB # L2 RAM Timing 1 Register
+DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register
+DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register
+DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register
+
+#Dram initalization
+DATA 0xFFD01400 0x43000400 # SDRAM Configuration Register
+# bit13-0: 0x400 (DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x36343000 # DDR Controller Control Low
+ 0x38543000
+# bit 3-0: 0 reserved
+# bit 4: 0=addr/cmd in smame cycle
+# bit 5: 0=clk is driven during self refresh, we don't care for APX
+# bit 6: 0=use recommended falling edge of clk for addr/cmd
+# bit14: 0=input buffer always powered up
+# bit18: 1=cpu lock transaction enabled
+# bit23-20: 3=recommended value for CL=3 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 6= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered
DIMM
+# bit30-28: 3 required
+# bit31: 0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x2302544B # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000032 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x0000000D # DDR Address Control
+# bit1-0: 01, Cs0width=x16
+# bit3-2: 11, Cs0size=1Gb
+# bit5-4: 00, Cs2width=nonexistent
+# bit7-6: 00, Cs1size =nonexistent
+# bit9-8: 00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0 required
+
+DATA 0xFFD0141C 0x00000642 # DDR Mode
+DATA 0xFFD01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 1, DDR ODT control lsd disabled
+# bit5-3: 000, required
+# bit6: 1, DDR ODT control msb, enabled
+# bit9-7: 000, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F07F # DDR Controller Control High
+# bit2-0: 111, required
+# bit3 : 1 , MBUS Burst Chop disabled
+# bit6-4: 111, required
+# bit7 : 0
+# bit8 : 0 , no sample stage
+# bit9 : 0 , no half clock cycle addition to dataout
+# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0 required
+
+DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
+# bit0: 1, Window enabled
+# bit1: 0, Write Protect disabled
+# bit3-2: 00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x07, Size (i.e. 128MB)
+
+DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00000000 # DDR ODT Control (Low)
+# bit3-0: 0, ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:0, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 00, ODT1 controlled by register
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000E90F # CPU ODT Control
+# bit3-0: F, ODT0Rd, Internal ODT asserted during read from DRAM bank0
+# bit7-4: 0, ODT0Wr, Internal ODT asserted during write to DRAM bank0
+# bit9-8: 1, ODTEn, never active
+# bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm
+
+DATA 0xFFD01480 0x00000001 # DDR Initialization Control
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
new file mode 100644
index 0000000..a928c2c
--- /dev/null
+++ b/include/configs/km_arm.h
@@ -0,0 +1,191 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafu...@marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, s...@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* for linking errors see
http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
+
+#ifndef _CONFIG_KM_ARM_H
+#define _CONFIG_KM_ARM_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_MARVELL
+#define CONFIG_ARM926EJS /* Basic Architecture */
+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD /* SOC Family Name */
+#define CONFIG_KW88F6281 /* SOC Name */
+#define CONFIG_MACH_SUEN3 /* Machine type */
+
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
+#undef CONFIG_CMD_DTT
+#undef CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
+#undef CONFIG_KIRKWOOD_PCIE_INIT /* Disable PCIE Port0 for kernel */
+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX 1 /* Console on UART0 */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_INITRD_TAG /* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+
+/*
+ * Without NOR FLASH we need this
+ */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
+/*
+ * NAND Flash configuration
+ */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_NAND_KIRKWOOD
+#define CONFIG_SYS_NAND_BASE 0xd8000000
+
+#define BOOTFLASH_START 0x0
+
+#define CONFIG_KM_CONSOLE_TTY "ttyS0"
+
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
+#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
+#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
+#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
+#define CONFIG_NR_DRAM_BANKS 4
+#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
+
+/*
+ * Ethernet Driver configuration
+ */
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+#define CONFIG_NET_MULTI /* specify more that one ports available */
+#define CONFIG_MII /* expose smi ove miiphy interface */
+#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
+#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 0
+#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
+#define CONFIG_RESET_PHY_R /* use reset_phy() to init 88E1118 PHY */
+
+/*
+ * UBI related stuff
+ */
+#define CONFIG_SYS_USE_UBI
+
+/*
+ * I2C related stuff
+ */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C /* I2C bit-banged */
+
+#if defined(CONFIG_HARD_I2C)
+#define CONFIG_I2C_KIRKWOOD
+#define CONFIG_I2C_KW_REG_BASE KW_TWSI_BASE
+#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_SPEED 100000
+#endif
+
+#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */
+#if defined(CONFIG_SOFT_I2C)
+#ifndef __ASSEMBLY__
+#include <asm/arch-kirkwood/gpio.h>
+extern void __set_direction(unsigned pin, int high);
+void set_sda (int state);
+void set_scl (int state);
+int get_sda (void);
+int get_scl (void);
+#define SUEN3_SDA_PIN 8
+#define SUEN3_SCL_PIN 9
+#define SUEN3_ENV_WP 38
+
+#define I2C_ACTIVE __set_direction(SUEN3_SDA_PIN, 0)
+#define I2C_TRISTATE __set_direction(SUEN3_SDA_PIN, 1)
+#define I2C_READ (kw_gpio_get_value(SUEN3_SDA_PIN) ? 1 : 0)
+#define I2C_SDA(bit) kw_gpio_set_value(SUEN3_SDA_PIN, bit);
+#define I2C_SCL(bit) kw_gpio_set_value(SUEN3_SCL_PIN, bit);
+#endif
+
+#define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */
+#define I2C_SOFT_DECLARATIONS
+
+#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_SPEED 100000
+#endif
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+
+#if defined(CONFIG_SYS_NO_FLASH)
+#define CONFIG_KM_UBI_PARTITION_NAME "ubi0"
+#undef CONFIG_FLASH_CFI_MTD
+#undef CONFIG_JFFS2_CMDLINE
+#endif
+
+#endif /* _CONFIG_KM_ARM_H */
diff --git a/include/configs/suen3.h b/include/configs/suen3.h
new file mode 100644
index 0000000..b2730a3
--- /dev/null
+++ b/include/configs/suen3.h
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafu...@marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, s...@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/*
+ * for linking errors see
+ * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
+ */
+
+#ifndef _CONFIG_SUEN3_H
+#define _CONFIG_SUEN3_H
+
+/* include common defines/options for all arm based Keymile boards */
+#include "km_arm.h"
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nKeymile SUEN3"
+
+#define CONFIG_HOSTNAME suen3
+
+/*
+ * Environment variables configurations
+ */
+#define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment
vars */
+#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50
+#define CONFIG_ENV_EEPROM_IS_ON_I2C 1
+#define CONFIG_SYS_EEPROM_WREN 1
+#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */
+#undef CONFIG_ENV_SIZE
+#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET)
+#define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0"
+
+/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+
+#define CONFIG_CMD_SF
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_HARD_SPI
+#define CONFIG_KIRKWOOD_SPI
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50Mhz */
+
+#define FLASH_GPIO_PIN 0x00010000
+
+#define MTDIDS_DEFAULT "nand0=orion_nand"
+/* test-only: partitioning needs some tuning, this is just for tests */
+#define MTDPARTS_DEFAULT "mtdparts=" \
+ "orion_nand:" \
+ "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
+
+#define CONFIG_KM_DEF_ENV_UPDATE
\
+ "update=" \
+ "spi on;sf probe 0;sf erase 0 50000;" \
+ "sf write ${u-boot_addr_r} 0 ${filesize};" \
+ "spi off\0"
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_KM_DEF_ENV \
+ "memsize=0x8000000\0" \
+ "newenv=setenv addr 0x100000 && " \
+ "i2c dev 1; mw.b ${addr} 0 4 && " \
+ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
+ " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \
+ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
+ " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \
+ "rootpath=/opt/eldk/arm\0" \
+ "EEprom_ivm=pca9544a:70:9\0" \
+ ""
+
+#endif /* _CONFIG_SUEN3_H */
--
1.6.2.5
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
