The CONFIG_SYS_CLK_FREQ is not used on some of the Gen3 boards, remove it. Moreover, on Ebisu this actually didn't match the comment in the config file at all, but since it was not used, there was no real problem.
Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com> Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org> --- include/configs/draak.h | 4 ---- include/configs/ebisu.h | 4 ---- include/configs/salvator-x.h | 4 ---- include/configs/ulcb.h | 4 ---- 4 files changed, 16 deletions(-) diff --git a/include/configs/draak.h b/include/configs/draak.h index e0a5344fbe..7aabf1178b 100644 --- a/include/configs/draak.h +++ b/include/configs/draak.h @@ -15,10 +15,6 @@ #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI -/* Board Clock */ -/* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 33333333u - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index 560fe5c45e..2e4974acb2 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -18,10 +18,6 @@ #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI -/* Board Clock */ -/* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 48000000u - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index fe0b499a0a..249982a0f7 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -15,10 +15,6 @@ #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI -/* Board Clock */ -/* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 33333333u - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index 7aa28d6854..5a99940ca6 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -15,10 +15,6 @@ #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI -/* Board Clock */ -/* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 33333333u - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ -- 2.16.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
