Tom Rini <tr...@konsulko.com> writes: > On Wed, May 23, 2018 at 09:24:03PM -0400, Thomas Fitzsimmons wrote: > >> Add support for loading U-Boot on the Broadcom 7445 SoC. This port >> assumes Broadcom's BOLT bootloader is acting as the second stage >> bootloader, and U-Boot is acting as the third stage bootloader, loaded >> as an ELF program by BOLT. >> >> Signed-off-by: Thomas Fitzsimmons <fitz...@fitzsim.org> >> Cc: Stefan Roese <s...@denx.de> >> Cc: Tom Rini <tr...@konsulko.com> >> Cc: Florian Fainelli <f.faine...@gmail.com> > > Please rebase this to master. While I can fixup the SPDX tags (and some > formatting issues from checkpatch.pl)
I think I fixed all of these in v3 (just posted), by adding an entry to top-level MAINTAINERS and using the new SPDX formatting rules. > I also run in to: +(bcm7445) In file included from > ../arch/arm/include/asm/system.h:6:0, +(bcm7445) from > ../arch/arm/include/asm/cache.h:11, +(bcm7445) from > ../include/net.h:15, +(bcm7445) from ../include/common.h:519, > +(bcm7445) from ../lib/asm-offsets.c:14: +(bcm7445) > ../arch/arm/include/asm/barriers.h:32:24: error: operator '>=' has no > left operand +(bcm7445) #if __LINUX_ARM_ARCH__ >= 7 +(bcm7445) ^~ > +(bcm7445) ../arch/arm/include/asm/barriers.h:36:26: error: operator > '==' has no left operand +(bcm7445) #elif __LINUX_ARM_ARCH__ == 6 > +(bcm7445) ^~ +(bcm7445) make[2]: *** [.././Kbuild:44: > lib/asm-offsets.s] Error 1 +(bcm7445) make[1]: *** [Makefile:1433: > prepare0] Error 2 > > Please look into, thanks! This was caused by a Kconfig option being renamed on master (CPU_V7 to CPU_V7A). Fixed in v3. Thanks, Thomas _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot