CS GPIO activation low/high is determinated by the device tree
so we don't need to take in accoung in cs_activate and cs_deactivate
Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com>
---
drivers/spi/mxc_spi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index fcb214a..0dccc38 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -60,7 +60,7 @@ static inline struct mxc_spi_slave *to_mxc_spi_slave(struct
spi_slave *slave)
static void mxc_spi_cs_activate(struct mxc_spi_slave *mxcs)
{
if (CONFIG_IS_ENABLED(DM_SPI)) {
- dm_gpio_set_value(&mxcs->ss, mxcs->ss_pol);
+ dm_gpio_set_value(&mxcs->ss, 1);
} else {
if (mxcs->gpio > 0)
gpio_set_value(mxcs->gpio, mxcs->ss_pol);
@@ -70,7 +70,7 @@ static void mxc_spi_cs_activate(struct mxc_spi_slave *mxcs)
static void mxc_spi_cs_deactivate(struct mxc_spi_slave *mxcs)
{
if (CONFIG_IS_ENABLED(DM_SPI)) {
- dm_gpio_set_value(&mxcs->ss, !(mxcs->ss_pol));
+ dm_gpio_set_value(&mxcs->ss, 0);
} else {
if (mxcs->gpio > 0)
gpio_set_value(mxcs->gpio, !(mxcs->ss_pol));
@@ -508,7 +508,7 @@ static int mxc_spi_probe(struct udevice *bus)
if (plat->base == FDT_ADDR_T_NONE)
return -ENODEV;
- ret = dm_gpio_set_value(&plat->ss, !(mxcs->ss_pol));
+ ret = dm_gpio_set_value(&plat->ss, 0);
if (ret) {
dev_err(bus, "Setting cs error\n");
return ret;
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
