Signed-off-by: Frans Meulenbroeks <fransmeulenbro...@gmail.com>
---
common/cmd_i2c.c | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index e54fc20..b51e3f4 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1302,25 +1302,24 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char
*argv[])
U_BOOT_CMD(
i2c, 6, 1, do_i2c,
"I2C sub-system",
- "speed [speed] - show or set I2C bus speed\n"
#if defined(CONFIG_I2C_MUX)
- "i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over
muxes\n"
+ "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over
muxes\ni2c "
#endif /* CONFIG_I2C_MUX */
+ "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
#if defined(CONFIG_I2C_MULTI_BUS)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
+ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of
device\n"
"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C
device\n"
"i2c mm chip address[.0, .1, .2] - write to I2C device
(auto-incrementing)\n"
"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device
(fill)\n"
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant
address)\n"
- "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
"i2c probe - show devices on the I2C bus\n"
"i2c reset - re-init the I2C Controller\n"
- "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of
device"
#if defined(CONFIG_CMD_SDRAM)
- "\n"
- "i2c sdram chip - print SDRAM configuration information"
+ "i2c sdram chip - print SDRAM configuration information\n"
#endif
+ "i2c speed [speed] - show or set I2C bus speed"
);
#if defined(CONFIG_I2C_MUX)
--
1.7.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
